Es gibt keine Produkte in Ihrem Warenkorb.
Ladegerät
Wird geladen ...
2S-Charging Wire - 35cm - XT60 XH | 4/5mm 2mm NOSRAM
2S-Charging Wire - 35cm - XT60 XH | 4/5mm 2mm
Gens Ace Gensace Imars S100 G-tech Ac Balance Rc Battery Charger-black - 100-EB
Gens Ace Gensace Imars S100 G-tech Ac Balance Rc Battery Charger-black
Gens Ace Imars D1000 Plus Smart Charger | Dual Channel | Ac 1000w | G-tech - 1000 Plus
Gens Ace Imars D1000 Plus Smart Charger | Dual Channel | Ac 1000w | G-tech
Gens Ace Imars D300 Plus Smart Charger | Dual-channel | G-tech | Eb Black - 300WPLUS-EB
Gens Ace Imars D300 Plus Smart Charger | Dual-channel | G-tech | Eb Black
Gens Ace Imars D300 Plus Smart Charger | Dual-channel | G-tech | Ew White - 300WPLUS-EW
Gens Ace Imars D300 Plus Smart Charger | Dual-channel | G-tech | Ew White
Gens Ace Imars Mini G-tech Usb-c 2-4s 60w Rc Battery Charger - 60WE2
Gens Ace Imars Mini G-tech Usb-c 2-4s 60w Rc Battery Charger
LRP 2x 2s-charging Wire - 35cm - Xt60 & Xh | 4/5mm & 2mm - 499001
LRP 2x 2s-charging Wire - 35cm - Xt60 & Xh | 4/5mm & 2mm
MR33 LiPo Voltage Checker (4/5mm Plug)
MR33 LiPo Voltage Checker (4/5mm Plug)
Met de praktische MR33 LiPo Checker kun je op het circuit snel controleren welke accu vol was en welke niet. Op een hectische racedag kan het gemakkelijk gebeuren dat je de verkeerde accu in de auto hebt - met deze handige LiPo-checker hoeft dat niet meer te gebeuren. Hij heeft een 4/5mm connector en kan daarom worden gebruikt met alle gangbare accu's (1 tot 4S)!
INFO: De LiPo Volt Checker is GEEN vervanging voor een dure voltmeter. Afwijkingen van 0,1 - 0,2 volt zijn daarom heel normaal.
De LiPo Volt Checker wordt alleen gebruikt om snel te controleren of de accu vol of leeg is!
SkyRC 12-18v Efuel 30a Power Supply, Sk-200013-04 - 200013-04
SkyRC 12-18v Efuel 30a Power Supply, Sk-200013-04
SkyRC D100neo Ac/dc Multi-function Smart - 100199-01
SkyRC D100neo Ac/dc Multi-function Smart
SkyRC eN3/en20 AC NiMH/NiCd Charger 1-3A, 4-8cell, Traxxas plug, SKY-eN3
SkyRC eN3 AC NiMH/NiCd Charger 1-3A, 4-8cell, Traxxas plug, SKY-eN3
SkyRC Q100neo Ac/dc Multi-function Smart Charger - 100223
SkyRC Q100neo Ac/dc Multi-function Smart Charger
SkyRC Q200 Ac/dc Quattro Balance Charger/discharger - 100158
SkyRC Q200 Ac/dc Quattro Balance Charger/discharger
SkyRC S100neo Ac/dc Smart Balance Charger - 100202-01
SkyRC S100neo Ac/dc Smart Balance Charger
SkyRC S65neo AC LiPo 2-4s 10A 65W Discharger 2A 10W
SkyRC S65neo AC LiPo 2-4s 10A 65W Discharger 2A 10W
Product information "SkyRC S65neo AC LiPo 2-4s 10A 65W Discharger 2A 10W"The SkyRC S65neo is an AC charger and discharger that fits in one hand at 84 x 84 x 45.3 mm and 200 g, yet delivers 65 W of charging power at up to 10 A charge current. It runs straight from the mains at 100 to 240 V, so no separate power supply is required.
It charges LiPo, LiHV, Li-ion and LiFe with 2 to 4 cells, NiMH and NiCd with 6 to 8 cells and Pb batteries with 3 or 6 cells (6 or 12 V). The pack connects to the XT60 main port, the balance lead to the balance port next to it, and a dedicated socket for the temperature sensor sits on the same side.
Ten amps from a housing this size
At up to 10 A of charge current a pack is ready again considerably sooner than on a 6 A charger. This is made possible by a synchronous rectification circuit that raises efficiency and reduces waste heat. Main output and balance port monitor every single cell while charging; balance current is 500 mA maximum.
Charge, discharge, cycle, store
Lithium packs can be run in Balance Charge, Charge, Storage and Discharge, NiMH and NiCd additionally in Re-Peak and the cycle programs Cycle_C_D and Cycle_D_C, which run one to three charge/discharge passes to refresh a pack. Pb batteries are charged normally, as AGM or in cold charge mode. Discharging runs at 0.1 to 2 A; because the balance port works alongside the main output, the charger reaches up to 10 W of discharge power.
Internal resistance and Battery Meter
The Battery Meter shows total pack voltage, individual cell voltages and internal resistance – useful for spotting a fading pack before it shows up in a race.
ColorX interface, six menu languages
The ColorX interface with its light cyan and green colour scheme and responsive Web2.0 menu is operated with three buttons. Menu languages are English, German, French, Spanish, Chinese and Japanese, with English as the factory setting. A temperature sensor adjusts fan speed to load and temperature, and firmware updates run over the Type-C port using the SkyRC Charger Master PC software.
Power supply mode for RC accessories
The S65neo can output an adjustable DC voltage of 6 to 17 V at 0.5 to 9 A. SkyRC explicitly intends this as a supplementary output for RC accessories such as a pit light, tyre warmer or tyre sander: capacitive loads such as chargers or power supplies must not be connected, and batteries are not to be charged in DC mode.
Features
- 65 W charging power, charge current up to 10 A
- Discharging at 0.1 to 2 A, up to 10 W via main output and balance port
- XT60 main port, balance port and temperature sensor socket
- Working modes: Balance Charge, Charge, Storage and Discharge (lithium), Charge, Re-Peak, Cycle_C_D, Cycle_D_C and Discharge (NiMH/NiCd), Normal, AGM Charge, Cold Charge and Discharge (Pb)
- Battery Meter for total voltage, individual cells and internal resistance
- Adjustable DC power supply, 6 to 17 V at 0.5 to 9 A
- Synchronous rectification for high efficiency and low heat generation
- ColorX colour interface with selectable menu language
- Temperature-controlled fan
- Protections: automatic charge current limit, capacity and time limit, over-temperature, over-current, short circuit, reverse polarity, flame-retardant chassis
- Firmware updates over Type-C with SkyRC Charger Master
Technical Data
| Feature | Value |
|---|---|
| Input voltage AC | 100 - 240 V (50/60 Hz), range 90 - 264 V (47/63 Hz) |
| Charge power | 65 W (±10%) |
| Discharge power | 10 W (±15%) |
| Charge current LiHV/LiPo/Li-ion/LiFe/NiMH/NiCd | 0.1 - 1 A (±0.3 A), 1.1 - 10 A (±10%) |
| Charge current Pb | 0.8 - 1 A (±0.3 A), 1.1 - 10 A (±10%) |
| Discharge current | 0.1 - 1 A (±0.3 A), 1 - 2 A (±10%) |
| Balance current | max. 500 mA per cell |
| Cell count LiHV/LiPo/Li-ion/LiFe | 2 - 4 cells |
| Cell count NiMH/NiCd | 6 - 8 cells |
| Cell count Pb | 3 or 6 cells (6 or 12 V) |
| DC power supply output | 6 - 17 V (±5%), 0.5 - 9 A (±10%), 65 W (±10%) |
| Connectors | XT60, balance port, temperature sensor, Type-C (firmware) |
| Menu languages | English, German, French, Spanish, Chinese, Japanese |
| Operating temperature | 0 °C to 40 °C |
| Dimensions | 84 x 84 x 45.3 mm |
| Weight | 200 g |
Scope of Delivery
- 1x SkyRC S65neo charger
- 1x AC power cord
- 1x instruction manual
SkyRC T120 Pico AC LiPo 2-4s 6A 2x60W Charger
SkyRC T120 Pico AC LiPo 2-4s 6A 2x60W Charger
Product information "SkyRC T120 Pico AC LiPo 2-4s 6A 2x60W Charger"The SkyRC T120 Pico is an AC charger with two fully independent charging circuits: two batteries of different chemistries can be charged at the same time, each with its own settings. Measuring 90 x 70 x 106 mm and weighing 355 g, it delivers 60 W per channel – 120 W of charging power in total – at up to 6 A charge current.
Both channels carry their XT60 output and balance socket on the front panel, so batteries are plugged in from the front. The charger handles LiPo, LiHV, Li-ion and LiFe with 2 to 4 cells, NiMH and NiCd with 6 to 8 cells and Pb batteries with 3 or 6 cells – the latter with an AGM mode and a cold charge mode for low temperatures alongside normal charging.
Precise control, down to every cell
Charging is governed by an Arm Cortex-M3 processor that keeps the selected values stable even under full load. Main output and balance port work together and monitor the voltage of every single cell throughout the charging process; balance current is 500 mA maximum.
Measure internal resistance on the charger
The Battery Meter function measures total pack voltage, individual cell voltages and internal resistance. During charging a press of the plus button is enough to scroll through the internal resistance of each cell – a quick way to judge the condition of a pack.
ColorX interface, six menu languages
The T120 Pico is operated through the ColorX interface with its light cyan and green colour scheme and responsive Web2.0 menu: plus, enter and minus buttons plus a dedicated channel button to switch between A and B. The menu language can be set to English, German, French, Spanish, Chinese or Japanese, with English as the factory setting. A temperature sensor adjusts fan speed to load and temperature, keeping the charger quiet at low currents. Firmware updates run over the USB-C port using the SkyRC Charger Master PC software.
Power supply mode for RC accessories
Each port can output an adjustable DC voltage of 6 to 17 V at 0.5 to 6 A. SkyRC explicitly intends this as a supplementary output for RC accessories such as a pit light, tyre warmer or tyre sander: capacitive loads such as chargers or power supplies must not be connected, and batteries are not to be charged in DC mode.
Features
- Two independent charging circuits at 60 W each, 120 W in total
- Charge current up to 6 A, balance current up to 500 mA
- XT60 output and balance socket per channel, accessible from the front
- Working modes: Balance Charge, Charge and Storage (lithium), Charge and Re-Peak (NiMH/NiCd), Normal, AGM Charge and Cold Charge (Pb)
- Battery Meter for total voltage, individual cells and internal resistance
- Adjustable DC power supply, 6 to 17 V and 0.5 to 6 A per port
- ColorX colour interface with selectable menu language
- Temperature-controlled fan
- Adjustable safety cut-off by time and capacity, switchable trickle charge, float mode for Pb batteries
- Protections: short circuit, reverse polarity, over-voltage, overload, over-temperature, capacity and time limit, flame-retardant chassis
- Firmware updates over USB-C with SkyRC Charger Master
Technical Data
| Feature | Value |
|---|---|
| Input voltage AC | 100 - 240 V (50/60 Hz) |
| Charge power | 60 W x 2 (±10%) |
| Charge current LiHV/LiPo/Li-ion/LiFe/NiMH/NiCd | 0.1 - 1 A (±0.15 A), 1.1 - 6 A (±10%) |
| Charge current Pb | 0.8 - 1 A (±0.15 A), 1.1 - 6 A (±10%) |
| Balance current | max. 500 mA |
| Storage mode discharge | max. 500 mA, via balance port only (up to 9 W) |
| Cell count LiHV/LiPo/Li-ion/LiFe | 2 - 4 cells |
| Cell count NiMH/NiCd | 6 - 8 cells |
| Cell count Pb | 3 or 6 cells |
| DC power supply output | 6 - 17 V (±0.2 V), 0.5 - 6 A |
| Connectors | 2x XT60, 2x balance, USB-C (firmware) |
| Menu languages | English, German, French, Spanish, Chinese, Japanese |
| Operating temperature | 0 °C to 40 °C |
| Dimensions | 90 x 70 x 106 mm |
| Weight | 355 g |
Scope of Delivery
- 1x SkyRC T120 Pico charger
- 1x power cord
- 1x instruction manual