Es gibt keine Produkte in Ihrem Warenkorb.
Neu
Wird geladen ...
Rear Axle Spacer 22mm / 1mm (Width set)GROEP C
Rear Axle Spacer 22mm / 1mm (Width set)GROEP C
Voor F104 achterpod met standaard hub links – 1mm breder sporing
Rear Axle Spacer 21mm GROEP C
Rear-Axle-Spacer-21mm-GROEP-C
Voor F104 achterpod met standaard hub links
Schumacher "Mono" Hoody Black - M
Schumacher "Mono" Hoody Black - M
Schumacher 'Mono' Hoodies, in stylish black with white printing. Red tie and inner hood.Improved thicker material for greater warmth, bigger hoods and internal mobile phone pocket.
65% Cotton 35% Polyester
To fit approximate chest size;
XXS-31" XS-34" S-37" M-40" L-43" XL-46" XXL-50" XXXL-53"
Schumacher "Mono" T-Shirt Black - M
Schumacher "Mono" T-Shirt Black - M
Schumacher 'Mono' T Shirts in black with white printing. Improved quality materials from our previous shirts with a slick look. Made with 100% Certified Organic Cotton. (Peta-Approved Vegan) To fit approximate chest size; XXS-28/30 XS-32/34" S-36/38" M-38/40" L-42/44" XL-46/48" XXL-50/52"
CORE RC Damper Grease - Heavy
CORE RC Damper Grease - Heavy
This CORE RC Damper Grease range is the perfect damping solution for the front of the Eclipse 6.Coming in 3 grades of damping effect. CR896 - Light (Yellow), CR897 - Medium (Green) and CR898 Heavy (Blue).
The ‘stickiness’ of the grease has been tuned in the composition of each, offering the correct range for damping, whilst making a long lasting effect where all 3 options hold in place even during intense suspension action.
They may also be used as ball differential grease or other damping applications.
Supplied in larger than normal 10ml pots.
CORE RC Damper Grease - Medium
CORE RC Damper Grease - Medium
This CORE RC Damper Grease range is the perfect damping solution for the front of the Eclipse 6.Coming in 3 grades of damping effect. CR896 - Light (Yellow), CR897 - Medium (Green) and CR898 Heavy (Blue).
The ‘stickiness’ of the grease has been tuned in the composition of each, offering the correct range for damping, whilst making a long lasting effect where all 3 options hold in place even during intense suspension action.
They may also be used as ball differential grease or other damping applications.
Supplied in larger than normal 10ml pots.
CORE RC Damper Grease - Light
CORE RC Damper Grease - Light
This CORE RC Damper Grease range is the perfect damping solution for the front of the Eclipse 6.Coming in 3 grades of damping effect. CR896 - Light (Yellow), CR897 - Medium (Green) and CR898 Heavy (Blue).
The ‘stickiness’ of the grease has been tuned in the composition of each, offering the correct range for damping, whilst making a long lasting effect where all 3 options hold in place even during intense suspension action.
They may also be used as ball differential grease or other damping applications.
Supplied in larger than normal 10ml pots.
Xray X4f Carbon Upper Deck - Split Rear - Open - 2.0mm - 301086
Xray X4f Carbon Upper Deck - Split Rear - Open - 2.0mm
SkyRC Xt60 To Xt90 Parallel Charging Cable (60a) - 600023-22
SkyRC Xt60 To Xt90 Parallel Charging Cable (60a)
Xtreme EP TWISTER Ultra Light RC Model Body (0.4mm)
Xtreme EP TWISTER Ultra Light RC Model Body (0.4mm)
The Twister 1/10 RC body from Xtreme Aerodynamics has been developed using advanced CFD (Computational Fluid Dynamics) software. The design has been optimised to accurately analyse and improve airflow and vortex formation. Numerous design adjustments and extensive track testing have resulted in a body with optimum balance, extremely high downforce and impressive aerodynamic efficiency. The Twister is supplied unpainted for full customisation and comes complete with a rear wing, window decals and a decal sheet.The body is made from tough Lexan and is available in three different thicknesses: ETS, Light and Ultra Light.
Features
- Designed for 1/10 electric touring cars
- Optimized design using CFD software for improved airflow
- High downforce and aerodynamic efficiency
- Unpainted for individual body styling
- Includes rear wing, window stickers and decal sheet
- Available in the following strengths: ETS, Light, Ultra Light
Specification
|
Scale: |
1:10 |
| Application: |
Onroad, Electric, TW |
|
Thickness |
0,4 mm |
Note: The body is supplied transparent and includes a decal sheet and window Stickers
RUDDOG Double Sided Tape (clear,25mm x 1m)
RUDDOG Double Sided Tape (clear,25mm x 1m)
The RUDDOG extra-strong adhesive double-sided tape can be removed without leaving any residue, making it ideal for various applications in your RC car.
Length: 1m
Width: 25mm
RUDDOG TC Body Carrying Bag
RUDDOG TC Body Carrying Bag
The RUDDOG TC Body Carrying Bag keeps your touring car shells protected and organized on the way to the track. With its generous size of approximately 47 × 40 × 20 cm, it comfortably holds about 6–7 1/10 touring car bodies. The rigid front and back panels with striking RUDDOG graphics protect your shells from dents and scratches, while the transparent side with zipper lets you quickly see and access the contents. Sturdy carry handles make transport easy from car to pit.
Features
-
Designed for storing and transporting 1/10 touring car bodies
-
Capacity for about 6–7 bodies
-
Semi-rigid panels for shape protection
-
Transparent side panel with zipper for quick access and easy content check
-
Durable outer material with distinctive RUDDOG graphics
-
Strong carry handles for comfortable transport
-
Flat-folding when empty for space-saving storage
Technical Data
-
Dimensions: approx. 47 × 40 × 20 cm
-
Capacity: about 6–7 1/10 TC bodies
-
Access: zippered transparent side panel
-
Color/design: black/red/white RUDDOG livery
Intellect MC3 8800mAh 120C 3.8V 1S Long Runtime Graphene 1/12 Pack LiHV
Intellect MC3 8800mAh 120C 3.8V 1S Long Runtime Graphene 1/12 Pack LiHV
As the leading manufacturer of lithium batteries for RC car modeling, Intellect presents its new MC3 LiHV battery series.
The MC3 series is the further development of the PT2 Platinum series. It sets a new standard in the RC car scene.
Intellect has a suitable battery in its range for most RC car applications.
Specifications:
- Capacity: 8800mAh
- Nominal Voltage: 3.8V / 1S
- Discharge-Rate: 120C
- Cell Type: Silicon-Graphene Lithium-Polymer
- Length: 93mm
- Width: 47mm
- Height: 18.5mm
- Weight: 152g
- Plug: 4mm
Charging and storage instructions:
Never store your batteries fully charged and or fully discharged. We recommend to store the batteries at the nominal voltage of the battery. We also recommend to use the batteries regulary, if you don't go to the track, then cycle them once every two weeks. The batteries must not be stored in direct sunlight, this also includes your car during a hot summer day. For a long lifetime of your batteries we recommend a charging rate of 1C. A higher charging rate will decrease the lifetime of your battery significantly.
We recommend to use a lipo bag during charging your battery: RUDDOG HD LiPo Ladetasche (180x80x80mm)
Installation:
When installing you battery, we recommend not to place them directly next to your motor. Should it not be possible to place your battery at a different place we strongly recommend the use of a motor fan to keep your motor cool and so also your battery. If you are looking for a motor fan, check out the RUDDOG aluminium fans, which are available in a 30mm and 40mm variant: RUDDOG 30mm Aluminium HV High Speed Cooling Fan and RUDDOG 40mm Aluminium HV High Speed Cooling Fan
Intellect batteries come including battery plugs. If you need additional plugs, you can find a wide range of plugs here: Stecker - RUDDOG Distribution GmbH
Limited Warranty:
We offer the German legal warranty time on all of our batteries. Inproper usage or storage can void this warranty.
Please note:
We do not currently ship LiPo or LiHV batteries outside mainland Europe.
CORE RC 1/12th Servo Saver 25T - SS GT
CORE RC 1/12th Servo Saver 25T - SS GT
Pre assembled servo saver for the Supastox GT and any other 1/12th pan car, includes brace. 25T Spline for Futaba servos.
SPEED PACK - O-ring 9.0x1.6mm (pk4)
SPEED PACK - O-ring 9.0x1.6mm (pk4)
O ring for the roller driveshafts on the Cougar 2 Works.
CORE RC Lockdown Heatsink Bullet Plug Grips - 5mm
CORE RC Lockdown Heatsink Bullet Plug Grips - 5mm
From CORE RC are these Lockdown Heatsink Bullet Plug Grips.A tight and reliable connection between your LiPo and speed control eliminates any losses of power, increased resistance, arcing and general poor electronic set up.
Giving a reliable connection with an easy twist of the attractive looking locking screw.
Easy to identify Red +ve and Black -ve plugs helps prevent cross connection and that moment every racer dreads, the magic smoke escaping from your speed control !
5mm Size.
CORE RC Lockdown Heatsink Bullet Plug Grips -4/5mm
CORE RC Lockdown Heatsink Bullet Plug Grips -4/5mm
From CORE RC are these Lockdown Heatsink Bullet Plug Grips.A tight and reliable connection between your LiPo and speed control eliminates any losses of power, increased resistance, arcing and general poor electronic set up.
Giving a reliable connection with an easy twist of the attractive looking locking screw.
Easy to identify Red +ve and Black -ve plugs helps prevent cross connection and that moment every racer dreads, the magic smoke escaping from your speed control !
4/5mm Size.
19805556 M2 Schroef 2x8mm(10) voor 3-pc voorwielen
19805556 M2 Schroef 2x8mm(10) voor 3-pc voorwielen
TAMIYA 54154 F104/F103 GROEP C Carbon versterkte staanders
TAMIYA 54154 F104/F103 GROEP C Carbon versterkte staanders
TAMIYA Spur Gear 93T/104T (F103GTGROEP C)04/64DP 53900
TAMIYA Spur Gear 93T/104T (F103GTGROEP C)04/64DP 53900
MR33 V5 Carpet Additive 100ml ETS
MR33 V5 Carpet Additive 100ml ETS
MR33 presenteert met trots de nieuwe V5 Bandenlijm, die bijzonder geschikt is voor gebruik op tapijt. Het is speciaal ontwikkeld voor tapijtraces met holle kamer rubberbanden en sponsrubberbanden en heeft een nieuwe en geavanceerde formule.De verwerkingstijd is tussen de 10 en 30 minuten, afhankelijk van de gewenste hechting. Het wordt aanbevolen om de banden tussen de runs door schoon te maken met remmenreiniger e.d.
De lijm is gemaakt en geproduceerd in Europa.
Inhoud: 100 ml
Algemeen Opmerking/ Algemene referentie
Regelmatig Vermijd huidcontact, oogcontact, inademing en inslikken van het product op . Na toevallig contact wassen of spoelen met water. Buiten bereik van kinderen bewaren.
Vermijd voortdurend huidcontact, oogcontact, inademen en inslikken van dit product. Na
MR33 Touring Car Wing Set Twister & Wolverine 0,7mm (1+1)
MR33 Touring Car Wing Set Twister & Wolverine 0,7mm (1+1)
MR33 Lexan achtervleugel set voor de Xtreme Twister en ZooRacing Wolverine touring car body's. Inhoud:
1 x Twister achtervleugel 0,7mm
1 x Wolverine achtervleugel 0,7mm
T-Work`s Xray X42025 Graphite Upper Holder for Bumper
T-Work`s Xray X42025 Graphite Upper Holder for Bumper
Bumperplaat van koolstofvezel (bovenkant) voor je Xray X4-2025 toerwagen.
Versterkt de voorkant ter hoogte van de ram en ziet er ook nog eens ongelooflijk goed uit!
Goudkontakt Deans T-Plug 1 paar
Goudkontakt Deans T-Plug 1 paar
Solderen zonder krimpkous door de isolatiehuls. Tevens geeft de huls ook nog eens extra grip bij het vastpakken.
Deans T-Plug stekker 5St.
Deans T-Plug stekker 5St.
Solderen zonder krimpkous door de isolatiehuls. Tevens geeft de huls ook nog eens extra grip bij het vastpakken.
Deans T-Plug contra 5St.
Deans T-Plug contra 5St.
Solderen zonder krimpkous door de isolatiehuls. Tevens geeft de huls ook nog eens extra grip bij het vastpakken.
TAMIYA Mini Cooper Racing MB-01 met certificaat
Mini Cooper Racing MB-01 met certificaat
Artikelnummer: 58747
EAN: 4950344587476
Dit product wordt vervaardigd door:
Tamiya Inc.
3-7 Ondabara, Suruga Ward
Shizuoka, 422-8022
Japan
www.tamiya.com
Verantwoordelijk in de EU is:
TAMIYA-CARSON Modellbau GmbH & Co. KG
Werkstraße 1
90765 Fürth
Fürth, Duitsland
www.tamiya.de
MODSTER Basic Charger AA-AAA incl. 4x rechargeable batteries Ultra Power AA Mignon 2200mAh NiMH
MODSTER Basic Charger AA-AAA incl. 4x rechargeable batteries Ultra Power AA Mignon 2200mAh NiMH
Â