JUSTOCK HANDOUT SPEC MOTOR - 2100KV- 21.5T HW30408016

Built to race fair The Justock Handout Motor is designed for competitive and fair racing in the world. The innovative manufacturing processes make the mechanical Timing of the motor and the internal resistance of the coil to achieve a high degree of consistency power output. Please Note; This motor
Built to race fair
The Justock Handout Motor is designed for competitive and fair racing in the world. The innovative manufacturing processes make the mechanical Timing of the motor and the internal resistance of the coil to achieve a high degree of consistency power output.

Please Note;

This motor needs to be used with vertical style motor mounts only, so it will not fit many modern touring cars.

The outlook appearance of the newly designed motor
The lightweight body of the motor weighs at 147g and is only 48 .5mm long. This reduces the overall weight of your vehicle and effectively improves the distribution of the center of gravity.

Dual sensor ports
The dual output sensor ports design on the motor meets various wiring needs and is aesthetically pleasing.

Ultra-low cogging torque, low linearity
The use of high-precision four-stage rotor carrying an independ ent HALL detection magnetic ring and a high precision hall plate positioning struc ture will ensure that the sensor output position signal is accurate. The cogging effect will be extremely low to ensure excellent lin earity and a great control feel.

Asymmetrical bearings for more reliable and smoother operation
The use of asymmetrical bearings provides higher performance and reduces resistance at the same time. The front end of the motor uses a larger precision bearing (D11 *D5*T5) to improve the bearing performance; the rear end uses a smaller precision bearing (D8*D3*T4).

Three models for a wide range of applications
The three models that are available to choose from are; 3200KV, 2600KV and 2100KV. Equivalent to the current SPEC motor; 13.5T/17.5T/21.5T. They mainly covers the STOCK categories in the 1/10 on-road and off-road vehicles.

High quality materials ensure maximum performance
At Hobbywing,we take pride in our manufacturing process and the high-quality materials we use to build a motor. We carefully select only the finest materials (stator, high temperature resistant wire(200°C), high temperature resistant explosion-proof rotor,high-precision grade bearings)that offer exceptional durability.

Ultra-high efficiency,low heat generation
Compared with the Justock G2.1 motor, the Justock Handout motor is 10% more efficient. The ultra-high operating efficiency further reduces the temperature of the motor.


Specifications 21.5T

Type

Scale - 1/10th
Brushed/Brushless - BL
Sensored/Sensorless - SD
Pole Count - 4

Relevant Parameters

KV Rating - 2100
LiPo Cells - 2-3S
No-load Current(A) - 1.7A

Size & Weight

O.D.(mm) - 36
Length (mm) - 48.5
Shaft Diameter (mm) - 3.175
Weight (g) - 148
Front Bearing - D11*D5*t5
Rear Bearing - D8*D3*t4

Timing

Fixed

Applications - 1/10th STOCK Class Racing

LRP HV Stock Spec GRAPHV LCG Modified GRAPHENE-4 6700mAh Hardcase Akku - 7.6V LiPo - 120C/60C - 431271

LRP HV Stock Spec GRAPHV LCG Modified GRAPHENE-4 6700mAh Hardcase Akku - 7.6V LiPo - 120C/60C - 431271

Maverick Tyre w/Inserts 2pcs (Scout RC) (MV25011)

Maverick Tyre w/Inserts 2pcs (Scout RC) (MV25011)

MODSTER LiPo Battery 2S 7,4V 4200 mAh 35C (T-Plug) PowerPack Car Hardcase

MODSTER LiPo Battery 2S 7,4V 4200 mAh 35C (T-Plug) PowerPack Car Hardcase

Product information "MODSTER LiPo Battery 2S 7,4V 4200 mAh 35C (T-Plug) PowerPack Car Hardcase"

 

MODSTER PowerPacks: Sensational price & performance ratio!

 

These PowerPacks are the 1st choice of the ambitious modeler:

The main focus is on the assembly with the connector systems used at MODSTER and the accuracy of fit of the battery in the car, plane, boat,etc. in question. 

However, MODSTER PowerPacks are also a great choice when used with other model brands!

 

The batteries have C-rates of 20-50C and can therefore be loaded with 20-50 times the rated capacity, depending on the designated C-rate! For a short time, about 10-15 seconds, also with double the value of the continuous load. The C-rates depend on the requirements of the devices for which they are designed and manufactured.

 

In the name of the product are always mentioned the connections:

Deans, EC3, XT60 and many more! The balancer connector is always ,,XH".

 

This honest battery line comes from one of the largest producers of lithium polymer batteries in the world. The batteries are assembled, tested and packed especially for MODSTER after careful cell selection. Elaborate quality assurance processes during production and before delivery ensure consistently high quality.

 

Lithium batteries are rechargeable batteries with very high energy density and require special care in handling, as well as charging/discharging.

 

Tips: 

• Preheating of cold accumulators increases performance and service life
• Storage temperature at room temperature of 20-25
• Always store in a partially charged state at approx. 60%.
• Protect from short circuit, damage, overheating, deep discharge and overcharge
• Only charge with a charger suitable for lithium batteries with the correct charging program outside the model and on a fireproof surface
• Do not use or charge batteries with cell damage or in a swollen state, but dispose of them properly.
• Never charge or discharge unattended!

MODSTER LiPo Battery 4S 14,8V 5000 mAh 30C (T-Plug) PowerPack

MODSTER LiPo Battery 4S 14,8V 5000 mAh 30C (T-Plug) PowerPack

These PowerPacks are the 1st choice of the ambitious modeler:

The main focus is on the assembly with the connector systems used at MODSTER and the accuracy of fit of the battery in the car, plane, boat,etc. in question. 

However, MODSTER PowerPacks are also a great choice when used with other model brands!

 

The batteries have C-rates of 20-50C and can therefore be loaded with 20-50 times the rated capacity, depending on the designated C-rate! For a short time, about 10-15 seconds, also with double the value of the continuous load. The C-rates depend on the requirements of the devices for which they are designed and manufactured.

 

In the name of the product are always mentioned the connections:

Deans, EC3, XT60 and many more! The balancer connector is always ,,XH".

 

This honest battery line comes from one of the largest producers of lithium polymer batteries in the world. The batteries are assembled, tested and packed especially for MODSTER after careful cell selection. Elaborate quality assurance processes during production and before delivery ensure consistently high quality.

 

Lithium batteries are rechargeable batteries with very high energy density and require special care in handling, as well as charging/discharging.

 

Tips: 

• Preheating of cold accumulators increases performance and service life
• Storage temperature at room temperature of 20-25
• Always store in a partially charged state at approx. 60%.
• Protect from short circuit, damage, overheating, deep discharge and overcharge
• Only charge with a charger suitable for lithium batteries with the correct charging program outside the model and on a fireproof surface
• Do not use or charge batteries with cell damage or in a swollen state, but dispose of them properly.
• Never charge or discharge unattended!

MODSTER screws set hexagon countersunk 375 pcs with storage box

MODSTER screws set hexagon countersunk 375 pcs with storage box

Productinformatie "MODSTER schroeven set zeshoekig verzonken 375 pc's met opslagdoos"
Hoogwaardig materiaal: De schroeven zijn gemaakt van hoogwaardig staal met een zwarte coating die ze roestbestand maakt. Diverse toepassingen: Vooral geschikt voor reparaties van RC-auto's/offroadbuggies/trucks, de meeste merken zoals MODSTER, Traxxas, HPI, Team Associated, Redcat, Axial, Losi, RC4WD Tamiya, DJI, Himoto.

Deze universele RC-voertuigschroevenset wordt geleverd in een stevige, transparante plastic opbergdoos die al je belangrijke schroeven, moeren en afstandhouders goed georganiseerd en op één plek bewaart zonder dat ze kwijt raken.

Diverse toepassingen, vooral geschikt voor reparaties van RC-auto's / offroadbuggies / vrachtwagens, compatibel met de meeste merken zoals Traxxas, HPI, Team Associated, Redcat, Axial, Losi, RC4WD Tamiya, DJI, Himoto en vele anderen.

Inbegrepen in de set:
20x zeshoekige schroeven M2x6
20x zeshoekige schroeven M2x8
20x zeshoekige schroeven M2x10
20x zeshoekige schroeven M2,5x6
20x zeshoekige schroeven M2,5x8
20x zeshoekige schroeven M2,5x16
20x zeshoekige schroeven M3x6
20x zeshoekige schroeven M3x8
20x zeshoekige schroeven M3x10
20x zeshoekige schroeven M3x14
20x zeshoekbouten M3x18
20x zeshoekbouten M3x28
20x zeshoekbouten M3x30
20x zeshoekbouten M3x35
10x zeshoekbouten M4x12
10x zeshoekbouten M4x16
10x zeshoekbouten M4x20

20x stopmoer M2
20x stopmoer M3
20x stopmoer M4

binnenste zeshoekmoersleutel 1,5mm
Binnenkant inbussleutel 2mm
binnenin inbussleutel 2,5mm
inbussleutel 4/5/5/5/7mm
opbergdoos

MULTI FUNCTION TOOL – BALL JOINT/SPANNER - BLACK/GOLD

Pop off ball joints with ease, adjust turnbuckles and check screw lengths with this small easy to use tool.

Aluminium anodised in black and gold.

PARMA 1:18 X-CITER BUGGY BODY

PARMA 1:18 X-CITER BUGGY BODY.
CLEAR BODY.

PARMA 10084 1/18 SPEED 8 HD BODY CLEAR

PARMA 10084 1/18 SPEED 8 HD BODY CLEAR

PARMA NISSAN TITAN BODY 1:18

PARMA NISSAN TITAN BODY 1:18

PARMA X-CITER BODY 1:18

PARMA X-CITER BODY 1:18
ONGESPOTEN BODY INCL STICKER SET

PowerHD Standard Servo - PHD-3001H

- Trekkracht 4,8V: 3,5 kg-cm
- Trekkracht 6,0V: 4,4 kg-cm
- Snelheid 4,8V: 0,14 sec.
- Snelheid 6,0V: 0,12 sec
- Voltage: 4,8-6,0V
- Gewicht: 43 gr
- Kogellager: 2x
- Motor type: DC motor
- Tandwielen: Kunststof
- Afmetingen: 40,7 x 20,5 x 39,5 mm

PowerHD-1501MG Analog Servo - PHD-1501MG

Power HD-1501MG Analog Servo
Koppel (4,8 V): 15,5 kg-cm (215,3 oz / in)
Koppel (6,0 V): 17,0 kg-cm (236,1 oz / in)
Snelheid: 0,16 sec (4,8 V) │ 0,14 sec (6,0 V)
Bedrijfsspanning: 4.8 ~ 6.0 DC Volts
Gewicht: 63,0 g (2,22 oz)
Type lager: kogellager x 2
Motortype: gelijkstroommotor
Versnellingstype: koper
Bedrijfstemperatuur: -20 ℃ ~ 60 ℃
Werkfrequentie: 1520μs / 50hz
Grootte: 40,7 x 20,5 x 39,5 mm (1,60 x 0,81 x 1,56 in)

RC COLOURS BLACK 400ML NR71 VOOR KUNSTOF

RC COLOURS BLACK 400ML NR71 VOOR KUNSTOF

RC COLOURS BLEU 400ML NR50 VOOR KUNSTOF

RC COLOURS BLEU 400ML NR50 VOOR KUNSTOF

RC COLOURS BLEU 400ML NR52 VOOR KUNSTOF

RC COLOURS BLEU 400ML NR52 VOOR KUNSTOF

RC COLOURS BLEU 400ML NR53 VOOR KUNSTOF

RC COLOURS BLEU 400ML NR53 VOOR KUNSTOF

RC COLOURS CREME WHITE 400ML NR12 VOOR KUNSTOF

RC COLOURS CREME WHITE 400ML NR12 VOOR KUNSTOF

RC COLOURS RED 400ML NR20 VOOR KUNSTOF

RC COLOURS RED 400ML NR20 VOOR KUNSTOF

RC COLOURS RED 400ML NR22 VOOR KUNSTOF

RC COLOURS RED 400ML NR22 VOOR KUNSTOF