Es gibt keine Produkte in Ihrem Warenkorb.
Neu
49 / 74
Wird geladen ...
SCHUMACHER RIDE HEIGHT ADJUSTERS- 0.00-1.50 4PRS - E1-E5,IC/2
€ 10,95
RIDE HEIGHT ADJUSTERS- 0.00-1.50 4PRS - E1-E5,IC/2
SCHUMACHER TITANIUM FRONT AXLE PR - E3-E5
€ 12,95
Optional lightweight titanium front axle for the Eclipse 2, 3 4 and 5
2.5g lighter than kit parts.
SCHUMACHER BALL BEARING - 1/4X3/8X1/8 FLANGED YELLOW - (PR)
€ 4,99
BALL BEARING - 1/4X3/8X1/8 FLANGED YELLOW - (PR)
1/12 FRONT MAGENTA 32SH A FOAM - 44MM
€ 8,95
"A" Foam is our most durable, affordable tyre. Perfect if you want to go many runs without taking the wheels off the car during weekly club racing. The wear rate of this foam is the lowest in the range, even lower than seen with "T" foam. It rarely offers the overall performance of the others, however in lower traction conditions; occasionally it is a match for the more expensive options. Suggested for use on Primafelt or CRC Black carpet, or when oily additive is in use.
SPOOL AXLE SET - 3 SCREW WHEELS - LMP12 V2
€ 47,50
A rear spool axle for the Eclipse range of cars, including Eclipse 4, when using industry standard, 3 screw fixing, rear wheels.
This set is ideal if you plan to use the Eclipse 4 using non Contact brand wheels, or when using ‘JT2’ Contact rear wheels.
When comparing to a ball differential, a spool is particularly effective in high grip conditions, offering improved mid corner stability, direction change and forward traction.
This set can be used on other brands of car, however, width spacing may need adjusting.
Includes 76T Spur.
SUNPADOW ERC Lithium Battery 5300mAh-2S1P-7.4V DEAN
€ 39,95
SUNPADOW ERC Lithium Battery 5300mAh-2S1P-7.4V
Sunpadow Platin HV ULCG 6100mAh 7.6V 2S 140/70C LiPo (5mm, 237g)
€ 85,95
Sunpadow Platin HV ULCG 6100mAh 7.6V 2S 140/70C LiPo (5mm, 237g)
Sunpadow Platin HV ULCG 6500mAh 7.6V 2S 140/70C LiPo (5mm, 257g)
€ 89,95
Sunpadow Platin HV ULCG 6500mAh 7.6V 2S 140/70C LiPo (5mm, 257g)
Sunpadow Platin HV 8200mAh 7.6V 2S 140/70C LiPo (5mm, 312g)
€ 114,95
Sunpadow Platin HV 8200mAh 7.6V 2S 140/70C LiPo (5mm, 312g)
Sunpadow Platin HV Shorty 5500mAh 7.6V 2S 140/70C LiPo (5mm, 224g)
€ 75,95
Sunpadow Platin HV Shorty 5500mAh 7.6V 2S 140/70C LiPo (5mm, 224g)
Sunpadow ERC 7300mAh 7.4V 2S 100C LiPo (T-Plug, 314g)
€ 59,95
Sunpadow ERC 7300mAh 7.4V 2S 100C LiPo (T-Plug, 314g)
Specifications:
| Capacity | 7300mAh |
| Voltage | 7.4V |
| C-Rate | 100C |
| Plug | T-plug |
| Wires | DEAN, Silicone |
| Wiring | Side wiring |
| Dimensions | 139*47*26mm |
| Weight | 314g |
Vigor Carbon Graphite Split Upper Deck 2.0mm Rear for Xray X4'23/22
€ 14,95
Vigor Carbon Graphite Split Upper Deck 2.0mm Rear for Xray X4'23/22
Vigor Carbon Graphite Split Upper Deck 1.6mm Rear for Xray X4'23/22
€ 14,95
Vigor Carbon Graphite Split Upper Deck 1.6mm Rear for Xray X4'23/22
Vigor Carbon Graphite Split Upper Deck 2.0mm Front for Xray X4'23/22
€ 13,99
Vigor Carbon Graphite Split Upper Deck 2.0mm Front for Xray X4'23/22
Vigor Carbon Graphite Split Upper Deck 1.6mm Front for Xray X4'23/22
€ 14,95
Vigor Carbon Graphite Split Upper Deck 1.6mm Front for Xray X4'23/22
Mon-Tech ML-GT3 GT12 Clear Body
€ 29,99
Mon-Tech ML-GT3 GT12 Clear Body
Montech heeft deze prachtige body speciaal ontworpen voor de steeds populairder wordende 1:12 GT klasse. De carrosserie heeft een zeer wendbaar en toch goed controleerbaar rijgedrag.
De ML-GT3 body wordt onbeschilderd geleverd, zowel voorruitmaskers als achtervleugel en decal sheet worden meegeleverd!
Technische specificatie
| Onroad: | 1:12 Pan Car |
| Dikte: | 0,7 mm |
Mon-Tech Trofeo 1:12 GT Body
€ 29,99
Mon-Tech Trofeo 1:12 GT Body
De Trofeo GT12 body van Montech is een geweldig uitziende GT body voor de 1:12 GT serie. Het komt compleet met voorruitmaskers en stickervel.
Montech maakt de Trofeo GT12 in een lichtere "Leggera"-versie (MB-022-001L) en in een iets zwaardere, normale versie (MB-022-001).
Technische specificatie
| Onroad: | 1:12 Pan Car |
| Dikte: | 0,7 mm |
Team Titan BLITZ P1 1:12 Clear Body
€ 27,50
Team Titan BLITZ P1 1:12 Clear Body
Team Titan Blitz P1 body voor de 1:12 GT Pan Car klasse.
De carrosserie is, zoals altijd bij Blitz, gemaakt van hoogwaardig polycarbonaat en wordt gebruikt in de GT-klasse.
Inhoud:
- Lichaam (onbeschilderd)
- Voorruitmaskers
- Decal blad
- Achtervleugel
Technische specificatie
| Onroad: | 1:12 Pan Car |
| Dikte: | 0,7 mm |
Hobbywing QuicRun WP1080-G2 Crawler Brushed Regler 80A, BEC 4A
€ 67,95
Hobbywing QuicRun WP1080-G2 Crawler Brushed Regler 80A, BEC 4A
Bittydesign Vision clear 1/8 buggy body Xray XB8E 2020 Pre-cut Electric
€ 39,95
Bittydesign Vision clear 1/8 buggy body Xray XB8E 2020 Pre-cut Electric
Bittydesign Eptron clear body 1/10 TC 190mm, ULT (Ultra Lite)
€ 29,99
Bittydesign Eptron clear body 1/10 TC 190mm, ULT (Ultra Lite)
TAMIYA 530936 TT02 / TT02S bovendek carbon 2mm
€ 24,99
Tamiya 530936 TT02 / TT02S bovendek carbon 2mm
Tuning onderdeel voor TT-02/TT-02S: Het hoogwaardige carbon bovendek verfijnt uw TAMIYA TT-02 chassis en geeft het ook meer stabiliteit. Inclusief montagemateriaal (schroeven en afstandhouders)
Geschikt voor alle TT-02/TT-02S chassis
TAMIYA 51701 XV-02 Urethaan bumper
€ 3,50
Tamiya 51701 XV-02 Urethaan bumper
De Tamiya Spare Parts line-up verwelkomt deze urethaan bumper voor gebruik met het XV-02 chassis. Vervang tijdig een versleten of beschadigd onderdeel door dit exemplaar, zodat uw model optimaal beschermd is.
- XV-02 Urethaan Bumper x1- Compatibel met XV-02 chassis auto's.
TAMIYA 54729 1/10 Racing Wing Alpha Carbon Pattern
€ 10,99
1/10 Racing Wing Alpha Carbon Pattern
For touring car races, it is essential to equip a rear wing that matches the body in terms of styling and down force effect. The racing wing version type "A" offers a stepped wing element design and is made of polycarbonate material. This version of the wing incorporates a carbon fiber pattern for stylistic appearance.
Set Contents:
-Racing Wing A x1
-J Parts (wing stays) x1
-Snap pins and O-rings necessary for attachment are included.
-Wing part has carbon pattern pre-printed.
-Compatible with 1/10 scale car bodies that have space to make attachment holes.
Tamiya nummer: 54729
ECLIPSE 5 - 1/12TH CIRCUIT - KIT
€ 349,99
The Schumacher Eclipse cars are the current reigning 1/12th scale IFMAR World and EFRA European Champions in both modified and stock classes.
The New Eclipse 5 features an extensive list of refinements, making it even faster and better handling.
The Eclipse 5 is the ultimate professional LMP12 racing chassis kit. The choice of champions!
- NEW - Alloy chassis design with a much shorter overall length. This allows for reduced chassis scrubbing along with a significant weight reduction from beyond both front and rear axles. These benefits allow the car to enter a corner more effortlessly and when in the corner, rotation is achieved more freely.
- NEW - Upgraded left and right rear hex wheel clamps to prevent any wheel wobble issues. Now perfectly true running wheels with our unique single nut rear wheels/solid axle!
- NEW - Servo mounting has been improved, resulting in direct mounting for the Sanwa micro range of servos such as the PGS-HR and SRG-HR. Direct and easy alignment onto the centre of the car. In doing this the chassis flexibility characteristics have been vastly improved, for performance and strength, by removing the large, off centre transverse slots previously used. All other brands of servo still can be used with the ultra-lightweight floating servo mount, included.
- NEW - Lightweight and flexible 3D printed rubber bumper, offering perfect body shell protection. Compared to the previous foam bumper, it is also very durable and long lasting.
- NEW - Black aluminium steering turnbuckles now included. Stealth and lighter weight.
- NEW - Updated top decks design, further reducing the polar moment of inertia. They now secure at the front within the wheelbase.
- NEW - The front lower beam has been improved, mounting in line with the front axle, and further reducing this forward weight, allowing for the reduced chassis length. The new beam makes use of super easy, slide in, speed secret ride height spacers. 0.5mm U7920 and 0.75mm U7921.
- NEW - Independent and lightweight front bumper mount makes front end assembly far easier. The front bumper can now be removed with only 2 screws.
- NEW - Moulded lighter weight front hub carrier design with much improved suspension action and damping characteristics. Un-sprung mass has also been reduced.
- NEW - Tweak free and easy LiPo mounting using new lighter weight O-ring fixing.
- NEW - Interchangeable front LiPo position stops with 4 equally spaced settings included.
- NEW - Optional 1.0° camber strap available. 1.5° camber is included in the kit for maximum steering and lap time in most conditions.
- NEW - Pod offset has been refined to achieve the perfect pod balance with a wider range of modern motors.
- NEW - Lightweight pod carbon parts for lower centre of gravity and overall car weight.
- NEW - Underside Variable Chassis chamfers, offering improved ground clearance, smoother scrubbing and better clearance to curbs or other corner markers.
Not forgetting all the usual features that have made the Eclipse IFMAR World and EFRA European Champion.
- Range of optional colour coded front springs.
- Big Bore side and centre dampers offering long lasting damping. They also give great damping oil retention (less frequent maintenance required) and a compact and central design. Damper geometry changes have improved damping characteristics.
- Lightweight pod assembly for smoother, more predictable drivability and bump handling. Strengthened for tweak prevention.
- Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
- Rear ride height adjusters, easier adjustment and 0.25mm height increments.
- Front beam socket using O-ring fixing system.
- Thread insert design making work on the car much quicker and simpler.
- Easy body shell height adjustment.
- Extra low rear roll centre pivot height for awesome rear traction.
- Centre pivot design for easy build and maintenance, with a fully bind free design.
- All black nuts as standard.
- Perfectly balanced rear pod assembly.
- Ultra-low motor position.
- Full range of colour coded rear and side springs.
- Separate springs for independent roll and bump stiffness adjustment.
- Ball bearing front and rear axles.
- Adjustable toe-in/out.
- Chassis balance pivot holes. For use with U3582 Precision Balance Pivot Set. (Available Separately) To optimise left/right weight distribution.
- Rear tweak adjustment via side springs.
- Simple rear droop adjustment.
- Small Kimbrough servo saver with stiffener included as standard.
- High tensile steel hex screws used throughout.
- High quality easy to follow instruction manual.
- Range of World Championship Winning Contact RC foam tyres available.
- Accepts a huge range of industry standard body shells, motors, LiPo’s and speed controllers.
- Suitable for USA rules GT12 racing.
|
|
AXON Precision Shock Bladder V2 Type FLEX NBR (4pcs·for Axon dampers,XRAY T TAMIYA TRF Yokomo BD10/BD9)
€ 7,95
AXON Precision Shock Bladder V2 Type FLEX NBR (4pcs·for Axon dampers, XRAY T TAMIYA TRF Yokomo BD10/BD9)
Power HD S25 Gold (0.06s/25.0kg/7.4V) Brushless Servo
€ 129,99
Servos feature all-aluminium housings in a 2-tone anodising that is available with silver, red or gold-colour details while the geartrains are made up using high-quality aluminium and steel gears. Japanese Noble potentiometers ensure highest possible precision and an updated PCB supports SSR and SUR modes. The line includes the S15 low-profile and S25 and S35 standard size servos all of which are usable with 6V to 8.4V input.
Specifications:
| Torque(6.0V) | 21.5 kg-cm (298.6 oz/in) |
| Torque(7.4V) | 25.0 kg-cm (347.2 oz/in) |
| Torque(8.4V) | 30.0 kg-cm (416.6 oz/in) |
| Speed | 0.075 sec (6.0V) │ 0.060 sec (7.4V) │ 0.055 sec (8.4V) |
| Operating Voltage | 6.0 ~ 8.4 DC Volts |
| Weight | 75.0 g (2.65 oz) |
| Bearing Type | Ball Bearing x 2 |
| Motor Type | Brushless Motor |
| Gear Type | Titanium & Steel |
| Operating Temperature | -20℃~60℃ |
| Working frequence | 1520μs / 333hz |
| Size | 40.7 x 20.5 x 38.6 mm ( 1.60 x 0.81 x 1.52 in) |
LRP HV 1/12 Ultra LCG GRAPHENE-4.1 8100mAh Hardcase battery - 3.7V LiPo - 120C/60C
€ 89,95
LRP HV 1/12 Ultra LCG GRAPHENE-4.1 8100mAh Hardcase battery - 3.7V LiPo - 120C/60C
Hobbywing ETS Xerun XR10 Justock G3 Brushless Speed Control ESC 60A, 2s-3 LiPo, BEC 3A
€ 79,99
Hobbywing ETS Xerun XR10 Justock G3 Brushless Speed Control ESC 60A, 2s-3 LiPo, BEC 3A
De ETS versie van de Hobbywing G3 Justock controller is een uitstekende controller voor alle stock klassen (tot de motorlimiet van 10,5T).
De juiste software voor de ETS FWD klasse (met RPM Limiter) staat al op deze regelaar af fabriek.
De besturing kan worden aangepast via de bekende Hobbywing programmeerboxen en WLAN modules.
Dit betekent dat de Justock G3 ETS-controller klaar is om te racen in de Euro Touring Series of in een race van de ToniSport Onroad Series (TOS).
De software kan ook worden bijgewerkt met andere versies.
Hobbywig heeft de controller voorzien van een complete aluminium behuizing en de condensator is in de controllerbehuizing geïntegreerd.
Kenmerken van de Justock G3 ETS-controller:
De juiste software voor de ETS FWD klasse (met RPM Limiter) staat al op deze regelaar af fabriek.
De besturing kan worden aangepast via de bekende Hobbywing programmeerboxen en WLAN modules.
Dit betekent dat de Justock G3 ETS-controller klaar is om te racen in de Euro Touring Series of in een race van de ToniSport Onroad Series (TOS).
De software kan ook worden bijgewerkt met andere versies.
Hobbywig heeft de controller voorzien van een complete aluminium behuizing en de condensator is in de controllerbehuizing geïntegreerd.
Kenmerken van de Justock G3 ETS-controller:
- Aluminium behuizing
- permanent geïnstalleerde condensator
- Bescherming tegen omgekeerde polariteit
- Programmering ook mogelijk via LCD box en WiFi/OTA module!
- BEC naar keuze met 6,0V of 7,4V - instelbaar op 4A
- zwarte motor- en accukabels
- Type: Borstelloos met sensor
- Continue stroom: 60A
- Ingangsspanning: 2S LiPo
- BEC: 6,0/7,4V - 4A
- Motorgrens: 10,5T (Let op, belasting afhankelijk!)
- Afmetingen: 40,9x33,9x32,1mm
- Gewicht: 75.4g
Technische specificatie
| ETS Goedgekeurd: | Ja |
