XT90 Plug M/F Black - 2pcs

XT90 Plug M/F Black - 2pcs

These connectors are made from high-temp stealthy Black nylon with gold-plated spring pins or sockets moulded in. The shape of the XT90 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 90A continuous current draw.

2 pairs of male and female.

XT90 Plug with Sheath Female Only - 4pcs

XT90 Plug with Sheath Female Only - 4pcs

These connectors are made from high-temp yellow nylon with gold-plated spring pins or sockets moulded in. The shape of the XT90 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 90A continuous current draw.

These versions use sheath housing, no need to use heat shrink tube, enhances overall performance in handling and durability.

4 Female plugs.

XT90 Plug with Sheath M/F Black - 2pcs

XT90 Plug with Sheath M/F Black - 2pcs

These connectors are made from high-temp stealthy Black nylon with gold-plated spring pins or sockets moulded in. The shape of the XT90 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 90A continuous current draw.

These versions use sheath housing, no need to use heat shrink tube, enhances overall performance in handling and durability.

2 pairs of male and female.

Xtreme 1:10 Electric Touring Car Rear WIng Set Angle 0° - 2° Pre-Cut (2)

Xtreme 1:10 Electric Touring Car Rear WIng Set Angle 0° - 2° Pre-Cut (2)

Deze Xtreme Aerodynamics achtervleugel set kan worden gebruikt om de aerodynamica van uw 1/10e schaal touring auto te veranderen.

De twee achtervleugels hebben een verschillende invalshoek van 0° of 2°, wat een groot verschil kan maken op uw toerwagen.

De achtervleugels passen natuurlijk op alle Xtreme bodies, maar ook op bijna alle andere huidige 1/10e schaal touring car bodies.  

Info:
Er is ook een andere set verkrijgbaar, hier hebben de vleugels een hoek van 3° en 4°
Artikelnummer: MX-MTRW1-10EPM2-4-Cut

Technische specificatie

Body Accessories:

Vleugel Onroad

Xtreme 1:10 Elektro Tourenwagen Heckflügel Set Winkel 3° - 4° Pre-Cut (2)

Xtreme 1:10 Electric Touring Car Rear WIng Set Angle 3° - 4° Pre-Cut (2)

Deze Xtreme Aerodynamics achtervleugel set kan worden gebruikt om de aerodynamica van uw 1/10e schaal touring auto te veranderen.

De twee achtervleugels hebben een verschillende invalshoek van 3° of 4°, wat een groot verschil kan maken op uw toerwagen.

De achtervleugels passen natuurlijk op alle Xtreme bodies, maar ook op bijna alle andere huidige 1/10e schaal touring car bodies.  

Info:
Er is ook een andere set verkrijgbaar, hier hebben de vleugels een hoek van 0° en 2°
Artikelnummer: MX-MTRW1-10EPM0-2-Cut

Technische specificatie

Body Accessories:

Vleugel Onroad

Xtreme 1/10 Twister Speciale Clear Body 0.5mm (190mm)

Xtreme 1/10 Twister Speciale Clear Body 0.5mm (190mm)

Xtreme 1/10 Twister SUPER LICHT Touring Car Clear Body 0.5mm ( 190mm )

Xtreme 1/10 Twister Touring Car Clear Body 0.5mm ( 190mm )

The all new Twister body from Xtreme is the newest contender on the high downforce body shell market. The body has a cab-forward design and produces a lot of downforce which makes it very easy to push the car to its limits. The Twister is made from high quality polycarbonate and comes unpainted with window masks and a headlight decal sheet. The body is available in a thickness of 0,5mm and 0,7mm.

Available Versions:

MX-MTB0413-05 Xtreme 1/10 Twister Touring Car Clear Body 0,50mm (190mm)

MX-MTB0413-07 Xtreme 1/10 Twister Touring Car Clear Body 0,70mm (190mm)

 

Technische Spezifikation

Onroad:	Touring Car
ETS Approved:	ETS Modified / Pro Stock

Related links to "Xtreme 1/10 Twister Touring Car Clear Body 0.5mm ( 190mm )"

Xtreme Italia FWD Body (clear) 0,7mm

Xtreme Italia FWD Body (clear) 0,7mm

Xtreme MACH1 1:10 Touring Car Clear Body - 0,7mm

Xtreme MACH1 1:10 Touring Car Clear Body - 0,7mm

Mach1 - fasten your seatbelts for the next stage of body shell development from Xtreme Aerodynamics.

The team around Cristian Boni once again created a great new body shell, which will impress you with a great performance and fast laptimes. 
The main features of the Mach1 are the new front hood with a significant look arount the grill and the headlights. 
New designed are also the wheel cases of the Mach1.
They will now ensure a better air flow, all the way from the front hood over the roof and along the sides of the body to the rear wing.
The whole aerodynamic efficiency of the Mach1 is an improvement over the previous bodies.
As a result the Mach1 provides more cornerspeed, a better air flow, more efficiency, and more overall downforce!

NOTE:
This body shell (0,7mm Version) is listed on the official ETS Body Shell List for Season #15 2022/23. It is allowed in the following racing classes:
ETS Pro Stock & ETS Modified

Available Versions:

MX-MTB0421-ETS  Xtreme MACH1 1:10 Touring Car Clear Body - 0,7mm

MX-MTB0421-L  Xtreme MACH1 1:10 Touring Car Clear Body - 0,5mm Lightweight

Technische Spezifikation

Onroad:	Touring Car
ETS Approved:	ETS Modified / Pro Stock
Thickness:	0,7 mm

Xtreme MACH1 1:10 Touring Car Clear Body - 0.5mm

Xtreme MACH1 1:10 Touring Car Clear Body - 0.5mm

Mach1 - fasten your seatbelts for the next stage of body shell development from Xtreme Aerodynamics.

The team around Cristian Boni once again created a great new body shell, which will impress you with a great performance and fast laptimes. 
The main features of the Mach1 are the new front hood with a significant look arount the grill and the headlights. 
New designed are also the wheel cases of the Mach1.
They will now ensure a better air flow, all the way from the front hood over the roof and along the sides of the body to the rear wing.
The whole aerodynamic efficiency of the Mach1 is an improvement over the previous bodies.
As a result the Mach1 provides more cornerspeed, a better air flow, more efficiency, and more overall downforce!

NOTE:
This body shell (0,5mm Version) is listed on the official ETS Body Shell List for Season #15 2022/23. It is allowed in the following racing classes:
ETS Pro Stock & ETS Modified

Available Versions:

MX-MTB0421-ETS  Xtreme MACH1 1:10 Touring Car Clear Body - 0,7mm

MX-MTB0421-L  Xtreme MACH1 1:10 Touring Car Clear Body - 0,5mm Lightweight

Technische Spezifikation

Onroad:	Touring Car
ETS Approved:	ETS Modified / Pro Stock
Thickness:	0,5 mm

Xtreme RED HAWK 1:10 Tourenwagen Karosserie (unlackiert) 0,7mm

REDHAWK - dat is de naam van de nieuwste body in 2023 van Xtreme Aerodynamics.

Het team rond Cristian Boni heeft opnieuw een geweldige body ontworpen, die ook tijdens de testritten de aandacht trok met snelle rondetijden.

Het resultaat: meer efficiëntie, meer downforce, meer bochtensnelheid!

INFO:
Deze body is toegestaan in het ETS seizoen #16 2023/24 in de volgende klassen 
ETS Pro Stock, ETS Modified (alle versies)
ETS 40+ Masters / 21.5 Stock (0.7mm ETS versie)

Beschikbare versies:

MX-MTB0424-ETS  Xtreme REDHAWK 1:10 Touring Car Clear Body - 0,7mm

MX-MTB0424-L  Xtreme REDHAWK  1:10 Touring Car Clear Body - 0,5mm Lichtgewicht

MX-MTB0424-UL  Xtreme REDHAWK  1:10 Touring Car Clear Body - 0,4mm Ultra Lichtgewicht

XTREME WING 1/10 MEDIUM PRE-CUT (2PCS)

Replacement 0.5mm pre-cut wings in two styles. It's always a good idea to check wing dimensions with your regulations, do not assume as these are pre cut they will conform without some trimming.

Xtreme ZENITH 1:10 Touring Car Body 190mm (clear) 0,4mm

Xtreme ZENITH 1:10 Touring Car Body 190mm (clear) 0,4mm

De ZENITH is de logische doorontwikkeling van de superpopulaire en succesvolle Twister Speciale van Xtreme Aerodynamics. De carrosserie is ontworpen door aerodynamici en voorzien van een heleboel kleine luchtgeleiders en flaps. De ZENITH heeft tijdens de testritten met IFMAR-wereldkampioen Bruno Coelho veel indruk gemaakt en is nu weer een mijlpaal in de geschiedenis van Xtreme. 
De ZENITH is verkrijgbaar in de bekende materiaaldiktes 0,4 mm | 0,5 mm | 0,7 mm

INFO :
Deze carrosserie is in het ETS-seizoen #19 2025/26 toegelaten in de volgende klassen (0,4 mm-versie)::
, ETS Pro Stock & ETS Modified
 

Yeah Racing 64 Titanium Turnbuckle 3x32mm (2pcs)

Yeah Racing 64 Titanium Turnbuckle 3x32mm (2pcs)

 CNC machined Titanium turnbuckles, made from 64 grade Titanium which ensures great stregnth and durability!

Features:

• For: RC Car Linkages
• Material: Titanium Ti-6Al-4V (ASTM Grade 5) 
• Color: Silver
• Thread Diameter : M3
• Total Length : 32mm

Includes:

• Titanium Turnbuckles (2 pcs)

Yeah Racing 64 Titanium Turnbuckle 3x36mm (2pcs)

Yeah Racing 64 Titanium Turnbuckle 3x36mm (2pcs)

CNC machined Titanium turnbuckles, made from 64 grade Titanium which ensures great stregnth and durability!

Features:

• For: RC Car Linkages
• Material: Titanium Ti-6Al-4V (ASTM Grade 5) 
• Color: Silver
• Thread Diameter : M3
• Total Length : 36mm

Includes:

• Titanium Turnbuckles (2 pcs)

Yeah Racing 64 Titanium Turnbuckle 3x38mm (2pcs)

Yeah Racing 64 Titanium Turnbuckle 3x38mm (2pcs)

 CNC machined Titanium turnbuckles, made from 64 grade Titanium which ensures great stregnth and durability!

Features:

• For: RC Car Linkages
• Material: Titanium Ti-6Al-4V (ASTM Grade 5) 
• Color: Silver
• Thread Diameter : M3
• Total Length : 38mm

Includes:

• Titanium Turnbuckles (2 pcs)

Yeah Racing 64 Titanium Turnbuckle 3x42mm (2pcs)

Yeah Racing 64 Titanium Turnbuckle 3x42mm (2pcs)

 CNC machined Titanium turnbuckles, made from 64 grade Titanium which ensures great stregnth and durability!

Features:

• For: RC Car Linkages
• Material: Titanium Ti-6Al-4V (ASTM Grade 5) 
• Color: Silver
• Thread Diameter : M3
• Total Length : 42mm

Includes:

• Titanium Turnbuckles (2 pcs)

Yeah Racing Spec D LS Wheel Offset +6 with Tire for 1/10 Drift (White/Gold, 4pcs)

Yeah Racing Spec D LS Wheel Offset +6 with Tire for 1/10 Drift (White/Gold, 4pcs)

YR exquisitely designed the SPEC D series which consists of both Wheels and Tires for 1/10 Drift cars. The Spec D Tires are made of premium material which enhance drifting performance on great variety of surfaces; while the Wheels are precisely crafted to give an authentic appearance without any trade off on durability. Spec D Series of Wheels and Tires is a must-have for drifters that care their drift machine's performance as much as the looks.

Features:

• For: 1/10 Drift Car
• Material: Premium Material
• Color: White & Gold
• Exquisite Design

Includes:

• Drift Wheels and Tires Set (4 sets)
• Tire Insets (4 pcs)

YellowRC Alkaline AAA 1.5V 4P, YEL2101 - 2101

YellowRC Alkaline AAA 1.5V 4P, YEL2101

Yikong 41012 Crawler 1/10 RTR

Yikong 41012 Crawler 1/10 RTR 

Product information "Yikong 41012 Crawler 1/10 RTR Gray"

A tribute to the golden era of American off-roaders, the Yikong YK41012 4WD Crawler.

Boxy, compact, and ready for any adventure. With its body styled after the legendary Bronco, the Yikong YK41012 perfectly captures the spirit of the classic American off-roaders of the '60s and '70s. Whether on the shelf, in the mud, or on the rocks, the "Bronco" feels right at home anywhere.

At its heart is a completely redesigned gearbox with an extremely low center of gravity (Ultra-LCG) built on the proven 1/10 chassis. Added to this are metal portal axles and manually lockable differentials at the front and rear axles, for maximum traction and scale-accurate climbing.

Top Features & Highlights

• Ultra-LCG Gearbox: A new gearbox layout lowers the center of gravity for greater stability and climbing performance.
• Metal Portal Axles: Increased ground clearance and a realistic look at the front and rear axles.
• Manually Lockable Differentials: Mechanical locking function right at the front and rear axles.
• 2-Speed Transmission: Switchable via remote control between climbing (Low) and trail speed (High), gear ratios 70.30 / 30.20.
• 25 kg High-Torque Steering Servo: Metal-gear servo with buffer protection for precise steering and a long servo life.
• Full-Metal Drivetrain: Fully ball-bearing equipped for smooth running and high durability.

Technical Specifications

Scale:	1:10
Wheelbase:	325 mm
Ground clearance:	65 mm
Tires:	2.2", approx. 116 × 42 mm
Dimensions (L×W×H):	510 × 250 × 245 mm
Weight:	approx. 2,575 g (brushed version)
Speed:	approx. 20 km/h with 3S (brushed)
Drivetrain:	4WD (all-wheel drive)
Motor:	550 32T high-torque brushed motor, 14T pinion
Speed Controller:	Hobbywing 1060, 60A, waterproof, T-plug
Transmission:	2-speed transmission (High/Low), gear ratios 70.30 / 30.20
Differentials:	front & rear manually lockable
Axles:	metal portal axles, front & rear
Drivetrain:	full-metal, fully ball-bearing equipped
Steering Servo:	25 kg, metal gears, with buffer protection
Battery:	2S/3S LiPo (7.4 / 11.1 V) or 7.2 V NiMH – not included
Remote Control:	2.4 GHz: 4-channel transmitter with 6-channel receiver

What's Included

Pre-assembled YK41012 Crawler (RTR), painted body, 2.4 GHz remote control, instruction manual. (Still required: drive battery (2S/3S LiPo or NiMH), a compatible charger, and 4× AA batteries for the transmitter.)