Optional LiPo battery for the SANWA M17 radio. 6000mah compared to the standard 2500mah supplied in the radio.

Specifications:

New for 2022 are Intellect's PT2 series range of awesome LiPo's. Metallic green lettering distinguishes them for 2022. 2 years of technological improvement for the 2022 versions see's improvements in power and runtime in the same size cases.

Huge range of batteries for all applications and required weights for perfect chassis balance and centre of gravity. All the batteries have a burst current of 120C and have LIHV technology.

As always with Intellect LiPo's they are excellent value for money.

BRCA/EFRA legal as of April 1st 2022.

Includes balance charge leads and connectors. Low Profile, 19.5mm, Low Weight 245g - Touring Modified small/med track.

Specifications:

Intellect Graphene 2024 "MC3" Hi Power 8400mAh 7.6V 2S 130C HV LiPo (5mm, 320g)

In 2024, Intellect has introduced the new MC3 series of racing batteries. The batteries under this collection are well designed for various racing applications.

With machinery upgrade, the MC3 batteries are having 1.5% improved in the production yield rate over the previous PT2 version.

The MC3 batteries would get EFRA, BRCA, & ROAR homologation accordingly.

Specifications:

In 2024, Intellect has introduced the new MC3 series of racing batteries. The batteries under this collection are well designed for various racing applications.

With machinery upgrade, the MC3 batteries are having 1.5% improved in the production yield rate over the previous PT2 version.

The MC3 batteries would get EFRA, BRCA, & ROAR homologation accordingly.

Specifications:

Intellect-M17-M17S 6000mAh-3.7V-ZENDER-ACCU

Intellect MC3 10000mAh 120C 7.6V Long Runtime Graphene Stick Pack LiHV

As the leading manufacturer of lithium batteries for RC car modeling, Intellect presents its new MC3 LiHV battery series.
The MC3 series is the further development of the PT2 Platinum series. It sets a new standard in the RC car scene.
Intellect has a suitable battery in its range for most RC car applications.

Specifications:

• Capacity: 10000mAh
• Nominal Voltage: 7.6V / 2S
• Discharge-Rate: 120C
• Cell Type: Silicon-Graphene Lithium-Polymer
• Length: 139mm
• Width: 47mm
• Height: 25.1mm
• Weight: 335g
• Plug: 5mm

Charging and storage instructions:

Never store your batteries fully charged and or fully discharged. We recommend to store the batteries at the nominal voltage of the battery. We also recommend to use the batteries regulary, if you don't go to the track, then cycle them once every two weeks. The batteries must not be stored in direct sunlight, this also includes your car during a hot summer day. For a long lifetime of your batteries we recommend a charging rate of 1C. A higher charging rate will decrease the lifetime of your battery significantly.

We recommend to use a lipo bag during charging your battery: RUDDOG HD LiPo Ladetasche (180x80x80mm)

Installation:

When installing you battery, we recommend not to place them directly next to your motor. Should it not be possible to place your battery at a different place we strongly recommend the use of a motor fan to keep your motor cool and so also your battery. If you are looking for a motor fan, check out the RUDDOG aluminium fans, which are available in a 30mm and 40mm variant: RUDDOG 30mm Aluminium HV High Speed Cooling Fan and RUDDOG 40mm Aluminium HV High Speed Cooling Fan

Intellect batteries come including battery plugs. If you need additional plugs, you can find a wide range of plugs here: Stecker - RUDDOG Distribution GmbH

Limited Warranty:

We offer the German legal warranty time on all of our batteries. Inproper usage or storage can void this warranty.

Please note:
We do not currently ship LiPo or LiHV batteries outside mainland Europe.

Intellect MC3 8800mAh 120C 3.8V 1S Long Runtime Graphene 1/12 Pack LiHV

As the leading manufacturer of lithium batteries for RC car modeling, Intellect presents its new MC3 LiHV battery series.
The MC3 series is the further development of the PT2 Platinum series. It sets a new standard in the RC car scene.
Intellect has a suitable battery in its range for most RC car applications.

Specifications:

• Capacity: 8800mAh
• Nominal Voltage: 3.8V / 1S
• Discharge-Rate: 120C
• Cell Type: Silicon-Graphene Lithium-Polymer
• Length: 93mm
• Width: 47mm
• Height: 18.5mm
• Weight: 152g
• Plug: 4mm

Charging and storage instructions:

Never store your batteries fully charged and or fully discharged. We recommend to store the batteries at the nominal voltage of the battery. We also recommend to use the batteries regulary, if you don't go to the track, then cycle them once every two weeks. The batteries must not be stored in direct sunlight, this also includes your car during a hot summer day. For a long lifetime of your batteries we recommend a charging rate of 1C. A higher charging rate will decrease the lifetime of your battery significantly.

We recommend to use a lipo bag during charging your battery: RUDDOG HD LiPo Ladetasche (180x80x80mm)

Installation:

When installing you battery, we recommend not to place them directly next to your motor. Should it not be possible to place your battery at a different place we strongly recommend the use of a motor fan to keep your motor cool and so also your battery. If you are looking for a motor fan, check out the RUDDOG aluminium fans, which are available in a 30mm and 40mm variant: RUDDOG 30mm Aluminium HV High Speed Cooling Fan and RUDDOG 40mm Aluminium HV High Speed Cooling Fan

Intellect batteries come including battery plugs. If you need additional plugs, you can find a wide range of plugs here: Stecker - RUDDOG Distribution GmbH

Limited Warranty:

We offer the German legal warranty time on all of our batteries. Inproper usage or storage can void this warranty.

Please note:
We do not currently ship LiPo or LiHV batteries outside mainland Europe.

Intellect MC4 10400mAh 120C 7.6V Long Runtime Graphene Stick Pack LiHV

High capacity LiHV stick pack for stock touring and long mains

The Intellect CT2S10400MC4 is a full height 2S LiHV stick pack that is purpose built for stock touring car classes and long main events. With 10400 mAh capacity and a weight of 330 g, this pack offers very long runtime and helps to calm the chassis on low grip or bumpy tracks. The case in the classic 139 mm stick format fits standard touring car battery trays and adds weight low in the chassis for a stable handling balance.

The 120C discharge rating delivers plenty of current headroom so the pack can supply a stable voltage profile throughout the run. This supports consistent lap times and a predictable driving feel from the first lap to the last. For stock gearing and power hungry layouts, the high capacity keeps voltage from dropping off too quickly and gives you margin at the end of the race. The 5 mm gold plated tube connectors provide a robust, low loss connection to the speed controller even at high current levels.

The 2026 Silicon Graphene LiHV cell technology offers very low internal resistance, reduced heat build up and improved cycle life when handled correctly. As a LiHV pack, the CT2S10400MC4 can be charged up to 4.35 V per cell with a nominal voltage of 7.6 V. This provides a noticeable performance boost at the beginning of the run and strong power delivery right to the end. Designed for chassis that support the common 139 mm stick format, this pack combines performance, runtime and stability for demanding stock racing.

Main features & benefits

• Very high 10400 mAh capacity for long stock mains and demanding layouts.
• LiHV technology with 7.6 V nominal voltage and charge end voltage up to 4.35 V per cell.
• 120C discharge rating for reliable power delivery and strong acceleration.
• HC21 full height stick case adds low placed weight for improved stability.
• Classic 139 x 47 mm stick format for standard 1/10 touring car battery trays.
• 5 mm gold plated tube connectors for robust, high current capable and low loss connections.
• 2026 Silicon Graphene cell chemistry with very low internal resistance and reduced heat build up.
• Approved for EFRA, BRCA, ROAR and IFMAR competition.

Technical data

Never store the pack fully charged or completely discharged. For optimum service life, we recommend a storage voltage of about 3.80 V to 3.85 V per cell. Avoid heat and direct sunlight during storage. A cool, dry place is ideal. A hot car trunk is not a suitable storage location for LiHV packs.

For maximum service life, we recommend charging at 1C. Higher charge currents can significantly reduce lifespan and performance and can negatively affect cell balance over time.

Safety note: Always use a suitable LiPo safety bag while charging, for example the RUDDOG HD LiPo Charging Bag (180x80x80 mm).

Installation recommendations

Make sure the pack does not sit directly against hot components such as the motor to avoid unnecessary heat input. To improve cooling of both motor and pack, we recommend the use of a fan, for example:

• RUDDOG 30mm Aluminium HV High Speed Cooling Fan
• RUDDOG 40mm Aluminium HV High Speed Cooling Fan

If the connectors on the speed controller are heavily worn, we recommend replacing them in time to keep contact resistance low. Suitable replacement connectors can be found in the RUDDOG Distribution range.

Warranty

The statutory warranty period applies to all packs. Please note that improper use, incorrect storage or mechanical damage can lead to loss of warranty coverage.

Intellect MC4 6000mAh 130C 7.6V High Power Graphene Shorty Pack LiHV

Extreme punch and race winning power for 1/10 offroad and touring cars

With the new 2026 specification of the MC4 series, Intellect pushes shorty race packs to the next level. The BT2S6000MC4 High Power shorty is designed for drivers who want maximum power delivery, extremely strong punch and a very stable voltage curve in a compact 2S format.

With a capacity of 6000mAh this LiHV shorty pack provides long runtime and very strong acceleration. The 130C discharge rating offers massive current reserves for both stock and modified classes, giving instant throttle response out of every corner while keeping the voltage high throughout the whole run.

Thanks to state of the art silicon graphene cell technology, the pack features extremely low internal resistance, reduced heat build up and excellent cycle life. As a LiHV pack it can be charged up to 4.35V per cell at a nominal voltage of 7.6 V, resulting in a very strong initial performance and consistent power delivery to the finish line.

Main features

• High capacity: 6000mAh for long runtime in 1/10 race cars.
• High Voltage (LiHV): Charge end voltage up to 4.35V per cell for increased RPM and torque.
• Silicon graphene technology: Updated 2026 spec chemistry with very low internal resistance and improved temperature behavior.
• 130C discharge rate: Provides extreme current delivery and maximum punch on throttle.
• Shorty High Power design: Increased height for maximum energy content and strong power delivery.
• 5mm tubes: Robust high current 5mm gold plated tubes for low loss power transfer.
• Race legal: Approved for EFRA, BRCA, ROAR and IFMAR competition.

Technical data

Never store the pack fully charged or fully discharged. For best service life we recommend a storage voltage of about 3.80V to 3.85V per cell. Avoid heat and direct sunlight during storage. A cool, dry place is ideal. A hot car trunk is not a suitable place to store LiPo packs.

For maximum life we recommend charging at 1C. Higher charge currents can noticeably reduce the life and performance of the cells and may worsen cell balance over time.

Safety note: Always use a suitable LiPo safety bag while charging, for example the RUDDOG HD LiPo Charging Bag (180x80x80mm).

Installation recommendations

Make sure the pack does not sit directly against hot components such as the motor to avoid unnecessary heat transfer. To keep motor and pack cool we recommend using an additional fan, for example:

• RUDDOG 30mm Aluminium HV High Speed Cooling Fan
• RUDDOG 40mm Aluminium HV High Speed Cooling Fan

If the connectors show heavy wear, we recommend replacing the plugs on the speed controller in time to avoid unnecessary resistance. Matching replacement connectors can be found in the RUDDOG Distribution product range.

Warranty

All packs are covered by the statutory warranty period. Please note that improper use, wrong storage or mechanical damage can lead to loss of warranty claims.

Intellect MC4 6600mAh 120C 7.6V Long Runtime Graphene Shorty Pack LiHV

Long runtime and consistent power for 1/10 offroad and touring cars

With the 2026 specification of the MC4 series, Intellect expands its competition range with a dedicated long runtime shorty. The BT2S6600MC4 shorty long runtime pack is designed for racers who need maximum runtime, a very stable voltage curve and reliable performance in a compact 2S format.

With a capacity of 6600mAh this LiHV shorty pack offers extended runtime for longer finals or demanding track layouts without adding unnecessary complexity to the chassis. The 120C discharge rating provides strong punch on throttle and keeps the voltage high throughout the whole run which makes the pack suitable for both stock and modified classes.

Thanks to state of the art silicon graphene cell technology the pack features very low internal resistance, reduced heat build up and a solid cycle life. As a LiHV pack it can be charged up to 4.35V per cell at a nominal voltage of 7.6 V which results in a noticeable performance boost at the start of the race and consistent power delivery to the finish line.

Main features

• Long runtime: 6600mAh capacity for extended runs in 1/10 competition cars.
• High Voltage (LiHV): Charge end voltage up to 4.35V per cell for increased RPM and torque.
• Silicon graphene technology: 2026 spec chemistry with reduced internal resistance and improved temperature behavior.
• 120C discharge rate: High current capability and strong punch on throttle.
• Shorty long runtime design: Increased energy content in a standard shorty footprint for more flexibility in racing classes.
• 5mm tubes: Robust high current 5mm gold plated tubes for low loss power transfer.
• Race legal: Approved for EFRA, BRCA, ROAR and IFMAR competition.

Technical data

Never store the pack fully charged or fully discharged. For best service life we recommend a storage voltage of about 3.80V to 3.85V per cell. Avoid heat and direct sunlight during storage. A cool, dry place is ideal. A hot car trunk is not a suitable place to store LiPo packs.

For maximum life we recommend charging at 1C. Higher charge currents can noticeably reduce the life and performance of the cells and may worsen cell balance over time.

Safety note: Always use a suitable LiPo safety bag while charging, for example the RUDDOG HD LiPo Charging Bag (180x80x80mm).

Installation recommendations

Make sure the pack does not sit directly against hot components such as the motor to avoid unnecessary heat transfer. To keep motor and pack cool we recommend using an additional fan, for example:

• RUDDOG 30mm Aluminium HV High Speed Cooling Fan
• RUDDOG 40mm Aluminium HV High Speed Cooling Fan

If the connectors show heavy wear we recommend replacing the plugs on the speed controller in time to avoid unnecessary resistance. Matching replacement connectors can be found in the RUDDOG Distribution product range.

Warranty

All packs are covered by the statutory warranty period. Please note that improper use, wrong storage or mechanical damage can lead to loss of warranty claims.

Intellect MC4 7400mAh 120C 7.6V Graphene 113mm Mid-Shorty Pack LiHV

High capacity stick pack for long finals and maximum consistency

With the 2026 specification of the MC4 series, Intellect further expands its line of 2S competition packs. The DT2S7400MC4 L113 stick LiHV pack is aimed at serious racers who require a combination of very long runtime, strong punch and a stable voltage curve in the classic 2S stick format.

With a capacity of 7400mAh and a 130C discharge rating, this LiHV stick pack delivers strong acceleration and high average voltage even in long finals and on demanding high grip tracks. Thanks to its 113 mm length, the pack is also a very attractive option for various 1/8 electric buggies such as the Team Associated RC8B4 and the Xray XB8E 2025, and it is increasingly being used in additional vehicles and classes.

The state of the art silicon graphene cell technology results in very low internal resistance, reduced heat build up and a robust cycle life. As a LiHV pack it can be charged up to 4.35V per cell at a nominal voltage of 7.6 V, which provides a noticeable performance boost at the start of the run and consistent power delivery all the way to the finish line.

Main features

• High capacity 7400mAh stick pack for long finals and demanding track layouts.
• High Voltage LiHV chemistry with charge end voltage up to 4.35V per cell for increased RPM and torque.
• Silicon graphene 2026 spec cell technology with very low internal resistance and improved temperature behavior.
• 130C discharge rating for extreme current capability and strong punch on throttle.
• L113 stick format for easy fitment in 1/10 chassis and compatibility with many 1/8 electric buggies that accept 113 mm packs.
• 5mm tubes for robust high current connection and low loss power transfer.
• Race legal for EFRA, BRCA, ROAR and IFMAR sanctioned competition.

Technical data

Never store the pack fully charged or fully discharged. For best service life we recommend a storage voltage of about 3.80V to 3.85V per cell. Avoid heat and direct sunlight during storage. A cool, dry place is ideal. A hot car trunk is not a suitable place to store LiHV packs.

For maximum life we recommend charging at 1C. Higher charge currents can noticeably reduce the life and performance of the cells and may worsen cell balance over time.

Safety note: Always use a suitable LiPo safety bag while charging, for example the RUDDOG HD LiPo Charging Bag (180x80x80mm).

Installation recommendations

Make sure the pack does not sit directly against hot components such as the motor to avoid unnecessary heat transfer. To keep motor and pack cool we recommend using an additional fan, for example:

• RUDDOG 30mm Aluminium HV High Speed Cooling Fan
• RUDDOG 40mm Aluminium HV High Speed Cooling Fan

If the connectors show heavy wear, we recommend replacing the plugs on the speed controller in time to avoid unnecessary resistance. Matching replacement connectors can be found in the RUDDOG Distribution product range.

Warranty

All packs are covered by the statutory warranty period. Please note that improper use, wrong storage or mechanical damage can lead to loss of warranty claims.

Intellect MC4 7800mAh 120C 7.6V Graphene 113mm Long Runtime Mid-Shorty Pack LiHV

This MC4 stick Akku pack in the 2026 LiHV specification is aimed at drivers who want long runtime and a clean, stable voltage feel under load. With 7800mAh capacity and 120C, it delivers noticeable punch on acceleration and consistently driveable power output throughout the entire run.

The 113mm stick format is ideal when a compact, competition ready form factor is required. The 5mm tubes provide a durable high current connection with reduced power loss.

This pack is intended for competition use and is marked for common regulations such as EFRA, BRCA, ROAR and IFMAR. LiHV means charging up to 4.35V per cell with a compatible LiHV charger.

Key Features

• 7800mAh for strong runtime and consistent power delivery
• LiHV technology with a nominal voltage of 7.6V and a charge cut off voltage up to 4.35V per cell.
• 120C discharge rate for powerful acceleration and a stable voltage curve.
• 5mm gold contact sockets for robust, high current capable connections and low loss power transfer.
• 2026 silicon graphene cell chemistry with very low internal resistance and reduced heat generation.
• Approved for EFRA, BRCA, ROAR and IFMAR.

Technical Data

Never store the Akku fully charged or completely discharged. For optimum service life, we recommend a storage voltage of about 3.80V to 3.85V per cell. Avoid heat and direct sunlight during storage. A cool, dry place is ideal. A hot car trunk is not a suitable storage location for LiHV Akkus.

For maximum service life, we recommend charging at 1C. Higher charge currents can significantly reduce cell lifespan and performance and can negatively affect cell balance over time.

Safety notice: Always use a suitable LiPo safety bag when charging, for example the RUDDOG HD LiPo charging bag (180x80x80mm).

Installation Recommendations

Make sure the Akku is not in direct contact with hot components such as the motor to avoid unnecessary heat exposure. To further cool the motor and Akku, we recommend using a fan, for example:

• RUDDOG 30mm Aluminium HV High Speed Cooling Fan
• RUDDOG 40mm Aluminium HV High Speed Cooling Fan

If the contacts are heavily worn, we recommend replacing the plugs on the speed controller in good time to minimize contact resistance. Suitable replacement plugs are available from the RUDDOG Distribution range.

Warranty

All Akkus are covered by the legally required warranty period. Please note that improper use, incorrect storage or mechanical damage may lead to loss of warranty claims.

LAADKABEL 2S 60CM LANG 4MM GOLDPLUG NAAR 4/5MM GOLDPLUG

LAADKABEL 2S 60CM XT60 NAAR 4/5MM GOLDPLUG

LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas iD batte

Lipo hardcase sunpadow 9300-7.6V-2S2P-120C 5MM
 

Lipo accu met harde behuizing van Sunpadow, 7.6V 2S2P configuratie, 9300mAh capaciteit, 120C ontlaadsnelheid en 5mm aansluitingen. 

Afmetingen: 25,1 x 47 x 139 mm. Gewicht: 322 gram.

Productinformatie "Lipo Safe Bag S 230x180mm Black"
Dankzij de LiPo Safety Bag kunnen batterijen vrij veilig worden vervoerd. De zeer sterke klittenbandsluiting zorgt er ook voor dat er niets uitvalt. Afmetingen: 23x18cm.

LRP 1/12 Hyper Lcg Stockspec Graphene-4.2 7400mah Hardcase Battery - 3.7v - 140c/70c

LRP Antix By 3100 - 7.4v - 50c Lipo Car Stickpack Hardcase - Xt60 Plug