Es gibt keine Produkte in Ihrem Warenkorb.
andere Marken
16 / 49
Wird geladen ...
DRY-FLUID EXTREME RC CAR - 20ML
€ 19,95
HIGH END SLIDE-LUBRICANT FOR LINKS, SHAFTS AND BEARINGS
BALSAM FOR RC CARS
DryFluid Extreme was specially developed for radio controlled model cars with the aim to preserve as long as possible or rather to extend significantly the efficiency and lifetime of these mechanical marvels.
The effect of this new lubricant for links, shafts and bearings begins where others show their limits. Lowest sliding friction, maximum speed and minimal dust and dirt binding were the main objectives of the development. Findings in the aviation and vehicle industries and the expert knowledge of RC car pilots are the driving forces behind this new lubricant.
SLIDE-LUBRICANT INSTEAD OF OIL
DryFLuid is a dry slide-lubricant rather than a classic oil or grease. DryFluid is not wax, it is neither greasy nor oily but is silicone-free. A long-lasting lubrication effect is achieved using dry particles, sliding polymers and high end sliding fluids. The application and long-term effects of DryFluid Extreme will inspire every RC pilot.
PRODUCT-FEATURES
Reduction of power loss on links, shafts and bearings and it guarantees a long life of the treated components.
Lowest sliding friction for free movement and wear reduction
Multistage lubricant system with immediate and long-term effects
Dust and dirt repellent
Extremely good creeping abilities
Excellent material compatibility with all current metal, plastic and natural rubber materials Outstanding adhesive and anti-corrosive properties
This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK by air transport.
Within the UK it can only be sent by UPS not post. Please only select UPS for the shipping method at the checkout.
DS Servo DS4125 Low Profile 29KG/0.15sec@7.4V
€ 19,95
DS Servo DS4125 Low Profile 29KG/0.15sec@7.4V
DSSERVO DS4125 - Powerful 25kg digital servo
Features:
- High-torque digital servo with up to 29kgcm torque at 7.4V
- Precision 3-pole motor
- IP66 û ideal for off-road use and harsh environments
- Wide operating voltage range from 4.8V to 7.4V
Technical specifications:
| Voltage: | 4.8V | 6.0V | 7.4V |
| Torque: | 20kgcm | 25kgcm | 29kgcm |
| Speed: | 0.20 sec/60° | 0.18 sec/60° | 0.15 sec/60° |
| Motor: | 3-pole digital | ||
| Gear train: | Gear ratio 365:1 | ||
| Bearings: | Dual ball bearings | ||
| Waterproof rating: | IP66 | ||
| Dimensions: | 40.8 × 20.2 × 29.5mm | ||
| Weight: | 60g | ||
| Signal input: | PWM, pulse width 500–2500µsec | ||
| Operating range: | Control angle 180° / 270° (500–2500µsec) | ||
| Frequency: | 50–330Hz | ||
| Deadband: | 2µsec | ||
| Cable length: | approx. 300mm | ||
DSSERVO BLS4355 Brushless 61KG/0.009sec@8.4V
€ 47,95
DSSERVO BLS4355 Brushless 61KG/0.009sec@8.4V
DSSERVO BLS4355 - Brushless digital servo with up to 61kgcm torque
Features:
- Highly efficient brushless motor for maximum power and smooth operation
- Up to 61kgcm torque at 8.4V ideal for large scale models, crawlers and high-end 1/8 vehicles
- Full metal case for optimal heat dissipation and maximum durability
- Dual ball bearings and high gear reduction (ratio 365:1) for high precision
- Waterproof to IP67 perfect for tough off-road and competition use
- Wide operating voltage range from 4.8V to 8.4V
Technical specifications:
| Voltage: | 4.8V | 6.0V | 7.4V | 8.4V |
| Torque: | 39kgcm | 47kgcm | 55kgcm | 61kgcm |
| Speed: | 0.14 sec/60° | 0.12 sec/60° | 0.10 sec/60° | 0.09 sec/60° |
| Motor: | Brushless digital | |||
| Gear train: | All metal | |||
| Bearings: | Dual ball bearings | |||
| Case: | Full metal, waterproof IP67 | |||
| Dimensions: | 40.8 × 20.2 × 29.5mm | |||
| Weight: | 85g | |||
| Operating range: | Control angle 180° / 270° (PWM 500–2500µsec) | |||
| Frequency: | 50–330Hz | |||
| Deadband: | 2µsec | |||
DSSERVO DS3335 Digital Brushless 39KG/0.05sec@8.4V
€ 29,95
DSSERVO DS3335 - Compact 35KG Brushless Servo with Precision Full Metal Gears Features: Technical Specifications:DSSERVO DS3335 Digital Brushless 39KG/0.05sec@8.4V
Voltage:
5.0V
7.4V
8.4V
Torque:
26 kgcm
35 kgcm
39 kgcm
Speed:
0.10 sec/60°
0.06 sec/60°
0.05 sec/60°
Motor:
Brushless
Gears:
Stainless Steel & Aluminum
Dimensions:
40 × 20 × 38.5mm
Weight:
60g
Frequency:
1520µs / 333Hz
Deadband:
2µsec
DumboRC X6 Transmitter 2.4GHz
€ 47,50
DumboRC X6 Transmitter 2.4GHz
The Dumbo RC X6 is the proven entry-level 2.4GHz radio for anyone who needs more than throttle and steering. Six channels give you room for lights, a winch, a fan or a second drive unit, while the mixing function lets you combine channels 1 and 2 – ideal for tanks and other tracked vehicles with differential steering.
67-channel FHSS frequency hopping keeps the link stable even at busy tracks, and the receiver reacts in just 3ms. Fail-safe, brake and out-of-control protection are on board, as is a throttle limiter that lets beginners practise at a safe speed. The transmitter can be powered in three ways: 4x AA batteries, the USB port, or a 2-3S LiPo via the battery socket – the voltage is detected automatically and a low-voltage alarm warns you in good time. The included X6F receiver measures just 35 x 20 x 13mm and supports high-voltage servos.
Technical Specifications:
| Transmitter | |
| Type: | 2.4GHz FHSS (67 channels), GFSK |
| Channels: | 6 |
| RC Models: | Car, Boat, Tank |
| Range: | 400-500m |
| Frequency Band: | 2400 - 2483.5MHz (ISM) |
| RF Power: | <20dBm |
| Resolution: | 4096 steps (0.5µs per step) |
| Power Supply: | 4x AA / USB / 2-3S LiPo, 4.8 - 12V |
| Low Voltage Alarm: | 7.4V / 4.8V |
| Current Draw: | 80 - 120mA |
| Dimensions: | 205 x 160 x 100mm |
| Receiver | X6F |
| Channels: | 6 |
| Type: | 2.4GHz |
| Response Time: | 3ms |
| Operating Voltage: | 3.3 - 10V (HV servos supported) |
| Current Draw: | 30mA |
| Gyroscope: | No (X6FG version with gyro available) |
| Dimensions: | 35 x 20 x 13mm |
Features:
- 67-channel FHSS frequency hopping, highly resistant to interference
- Fail-safe, brake function and out-of-control protection
- Mixed mode for tanks: channels 1 and 2 can be set separately and mixed
- Adjustable throttle limiter for beginners
- Three power options: AA batteries, USB or 2-3S LiPo with automatic voltage detection
- Compatible with the X6F and X6FG (gyro) receivers
Scope of delivery:
- 1x X6 Transmitter
- 1x X6F Receiver
- User manual
Not included:
- 4x AA batteries
ECLIPSE 5 - 1/12TH CIRCUIT - KIT
€ 349,99
The Schumacher Eclipse cars are the current reigning 1/12th scale IFMAR World and EFRA European Champions in both modified and stock classes.
The New Eclipse 5 features an extensive list of refinements, making it even faster and better handling.
The Eclipse 5 is the ultimate professional LMP12 racing chassis kit. The choice of champions!
- NEW - Alloy chassis design with a much shorter overall length. This allows for reduced chassis scrubbing along with a significant weight reduction from beyond both front and rear axles. These benefits allow the car to enter a corner more effortlessly and when in the corner, rotation is achieved more freely.
- NEW - Upgraded left and right rear hex wheel clamps to prevent any wheel wobble issues. Now perfectly true running wheels with our unique single nut rear wheels/solid axle!
- NEW - Servo mounting has been improved, resulting in direct mounting for the Sanwa micro range of servos such as the PGS-HR and SRG-HR. Direct and easy alignment onto the centre of the car. In doing this the chassis flexibility characteristics have been vastly improved, for performance and strength, by removing the large, off centre transverse slots previously used. All other brands of servo still can be used with the ultra-lightweight floating servo mount, included.
- NEW - Lightweight and flexible 3D printed rubber bumper, offering perfect body shell protection. Compared to the previous foam bumper, it is also very durable and long lasting.
- NEW - Black aluminium steering turnbuckles now included. Stealth and lighter weight.
- NEW - Updated top decks design, further reducing the polar moment of inertia. They now secure at the front within the wheelbase.
- NEW - The front lower beam has been improved, mounting in line with the front axle, and further reducing this forward weight, allowing for the reduced chassis length. The new beam makes use of super easy, slide in, speed secret ride height spacers. 0.5mm U7920 and 0.75mm U7921.
- NEW - Independent and lightweight front bumper mount makes front end assembly far easier. The front bumper can now be removed with only 2 screws.
- NEW - Moulded lighter weight front hub carrier design with much improved suspension action and damping characteristics. Un-sprung mass has also been reduced.
- NEW - Tweak free and easy LiPo mounting using new lighter weight O-ring fixing.
- NEW - Interchangeable front LiPo position stops with 4 equally spaced settings included.
- NEW - Optional 1.0° camber strap available. 1.5° camber is included in the kit for maximum steering and lap time in most conditions.
- NEW - Pod offset has been refined to achieve the perfect pod balance with a wider range of modern motors.
- NEW - Lightweight pod carbon parts for lower centre of gravity and overall car weight.
- NEW - Underside Variable Chassis chamfers, offering improved ground clearance, smoother scrubbing and better clearance to curbs or other corner markers.
Not forgetting all the usual features that have made the Eclipse IFMAR World and EFRA European Champion.
- Range of optional colour coded front springs.
- Big Bore side and centre dampers offering long lasting damping. They also give great damping oil retention (less frequent maintenance required) and a compact and central design. Damper geometry changes have improved damping characteristics.
- Lightweight pod assembly for smoother, more predictable drivability and bump handling. Strengthened for tweak prevention.
- Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
- Rear ride height adjusters, easier adjustment and 0.25mm height increments.
- Front beam socket using O-ring fixing system.
- Thread insert design making work on the car much quicker and simpler.
- Easy body shell height adjustment.
- Extra low rear roll centre pivot height for awesome rear traction.
- Centre pivot design for easy build and maintenance, with a fully bind free design.
- All black nuts as standard.
- Perfectly balanced rear pod assembly.
- Ultra-low motor position.
- Full range of colour coded rear and side springs.
- Separate springs for independent roll and bump stiffness adjustment.
- Ball bearing front and rear axles.
- Adjustable toe-in/out.
- Chassis balance pivot holes. For use with U3582 Precision Balance Pivot Set. (Available Separately) To optimise left/right weight distribution.
- Rear tweak adjustment via side springs.
- Simple rear droop adjustment.
- Small Kimbrough servo saver with stiffener included as standard.
- High tensile steel hex screws used throughout.
- High quality easy to follow instruction manual.
- Range of World Championship Winning Contact RC foam tyres available.
- Accepts a huge range of industry standard body shells, motors, LiPo’s and speed controllers.
- Suitable for USA rules GT12 racing.
|
|
Excel Double Honed Blade (5pcs)
€ 4,50
Features:
- Made from carbon steel, #11 Blades
- Available in packs of 5, 15, 100, 500, 1000
- The double honed replacement blade has a strong tip and flex so you do not have to worry about breaking their edge and tip.
- This versatile replacement blade fits with all standard light and medium duty Xacto style knives.
- Used with: cuts on paper, card-stock, stencils, film, photographs, tape, plastic, cork, wood, vinyl, cloth, leather, cardboard, foam boards and most other light-weight crafting.
- Used for: model making, paper cutting, cake decorating, Cricut vinyl cutting and polymer clay.
- Used by graphic artists, architects, car wrappers, designers, hobbyists, scrapbook artists and crafters.
- Fits with: K1, K3, K17, K18, K26, K30, & K71 handles
- L – 1.575/ H – 0.350 / E - 0.975/ S – 0.250/ T – 0.020
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT RED (6)
€ 3,99
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT RED (6)
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT YELLOW (6)
€ 3,99
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT YELLOW (6)
EXTRA LONG BODY CLIP 1/10 - METALLIC PURPLE (6)
€ 3,99
