MJX Hyper GO 14212 1/14 Truggy 4WD RTR
Product information "MJX Hyper GO 14212 1/14 Truggy 4WD RTR"
Small, loud, uncompromising - The MJX Hyper Go 14212 1/14 Brushless Truggy.
56 km/h from a truggy that fits on any desk. The MJX Hyper Go 14212 is a 1/14 scale 4WD truggy that brings big-basher engineering down to a manageable size - brushless, four-wheel drive and with a full metal drivetrain. At 310 mm long, on 94 mm tyres and with generous ground clearance, it runs where bigger models simply don't have the room: back yard, dirt track, gravel car park, grass.
Power comes from the 2852 brushless motor paired with the 45A E45P brushless ESC, which is already 3S-capable - as standard the truck runs on the supplied 2S 3000mAh LiPo. An aluminium heatsink with fan on the motor and a waterproof receiver box keep things reliable. The drivetrain is metal throughout: metal driveshafts, metal CVD driveshafts, chrome steel transmission gears, metal differential and a complete set of ball bearings. Add aluminium oil-filled shocks all round. No toy-grade internals under the body - this is hobby-grade hardware in miniature.
Top Features & Highlights
- Brushless Power: 2852 brushless motor with E45P 45A ESC (2S–3S capable) - up to 56 km/h.
- Full Metal Drivetrain from the Factory: Metal driveshafts, metal CVD shafts, chrome steel gears, metal differential, complete ball bearing set.
- Aluminium Oil-Filled Shocks: Real oil-filled dampers instead of friction shocks - noticeably calmer over rough ground.
- Active Motor Cooling: Aluminium heatsink with fan keeps performance consistent through longer full-throttle runs.
- Waterproof Receiver Box: Electronics protected - puddles, wet grass and damp ground are no problem.
- T3D 2.4GHz Radio: Fully proportional throttle and steering, with trim adjustment for both, approx. 120 m range.
- Second Body Included: Spare or a change of look - both bodies come painted.
- Comprehensive Spares Package: Front upper and lower control arms, shock springs, body clips and a wheelie bar are included.
- Ready to Go: Battery, transmitter, USB charging cable and tools are in the box - only two AA batteries for the transmitter are missing.
Technical Specifications
| Item No.: |
14212 |
| Scale: |
1:14 |
| Drivetrain: |
4WD |
| Motor: |
2852 Brushless Motor with aluminium heatsink & fan |
| ESC: |
E45P, 45A Brushless ESC (2S–3S capable) |
| Steering Servo: |
19g digital servo, 2.2 kg/cm, metal gears |
| Radio System: |
T3D 2.4GHz, fully proportional, range approx. 120 m |
| Top Speed: |
56 km/h |
| Runtime: |
approx. 13 minutes |
| Battery: |
7.4V 3000mAh 25C LiPo (included), 210 g |
| Charging Time: |
approx. 330 minutes via USB cable |
| Drivetrain Detail: |
Metal driveshafts, metal CVD, chrome steel gears, metal differential, full ball bearings |
| Shocks: |
Aluminium oil-filled shocks |
| Receiver: |
Waterproof receiver box |
| Dimensions (L x W x H): |
310 x 225 x 127 mm |
| Wheelbase: |
198 mm |
| Track Width: |
195 mm |
| Tyre Diameter: |
94 mm |
| Vehicle Weight: |
1350 g |
Box Contents
Pre-assembled Hyper GO 14212 (RTR) incl. battery and transmitter, second body shell, USB charging cable, manual, hex wrench, screwdriver, front and rear body support bracket (1x each), front left/right upper and lower control arms (4x), 7-shaped hex keys (3x), rear wing assembly, wheelie bar, body clips (4x) and shock springs (4x). (Still required: 2x AA batteries for the transmitter)
