Es gibt keine Produkte in Ihrem Warenkorb.
RTR-Kits
Wird geladen ...
ABSIMA 1:24 2WD Racing Buggy "X Racer" RTR with ESP
€ 49,95
HIGHLIGHTS:
- RTR version with battery, charger and remote control
- Speed +20 km/h
- Full digital proportional control
- Electronic Stability Program (ESP)
Made of super elastic plastic to absorb shocks well, high-grip off-road wheels and equipped with the finest technology, the vehicle leaves nothing to be desired. The "8520" coreless motor accelerates the RC car up to 20km/h. If this is too fast for you in the living room or children's room, you can also reduce the speed thanks to a rotary control nub.
Throttle/brake and steering commands are sensitively implemented in full proportion by the 2.4GHz remote control. Due to the modern transmission system, several vehicles can of course be driven at the same time. So nothing stands in the way of the mini Grand Prix at home!
The HIGHLIGHT is probably the built-in "ELECTRONIC STABILITY PROGRAM" (ESP) which keeps the rear-driven vehicle always well on track even on smooth surfaces such as laminate or tiled floors. Thanks to a built-in "gyro" as you also know from drones, the vehicle detect unnatural movements of the rear and steers automatically against it to prevent a breakaway (to a certain extent). However, if you still want to make wild drifts, you simply have to push the technology to its limits with your own driving skills, which is a lot of fun!
FEATURES:
- 2WD rear wheel drive
- 2.4GHz remote control
- Fully proportional control
- Maximum speed can be limited on the remote control
- Removable battery
SPECIFICATION:
- Servo: 3.7g Servo
- Motor: 8520 Coreless Motor
- Battery: 3.7V 300mAh LiPo Battery
- Speed throttleable: Yes
- ESP built in: Yes
- Charging time: approx. 30-40 minutes
- Driving time: approx. 20 minutes
- Dimensions (L/W/H): 155x95x65 mm
- Weight: 110 g
INCLUDED:
- 1:24 X-Racer Buggy RTR
- 2.4GHz gRemote Control
- 300mAh LiPo Battery
- USB Charger
- Manual
REQUIRED ACCESSORIES:
- 2 AA Batteries for Remote Control
Our small 1:24 scale X-Racers are the absolutely ideal introduction to the RC hobby for young and old and will turn any office or living room into a race track!
ABSIMA 1:24 2WD Touring/Drift Car "X Racer" RTR with ESP
€ 49,95
HIGHLIGHTS:
- RTR version with battery, charger and remote control
- Speed +20 km/h
- Full digital proportional control
- Electronic Stability Program (ESP)
Our small 1:24 scale X-Racers are the absolutely ideal introduction to the RC hobby for young and old and will turn any office or living room into a race track!
Made of super elastic plastic to absorb shocks well, high-grip off-road wheels and equipped with the finest technology, the vehicle leaves nothing to be desired. The "8520" coreless motor accelerates the RC car up to 20km/h. If this is too fast for you in the living room or children's room, you can also reduce the speed thanks to a rotary control nub.
Throttle/brake and steering commands are sensitively implemented in full proportion by the 2.4GHz remote control. Due to the modern transmission system, several vehicles can of course be driven at the same time. So nothing stands in the way of the mini Grand Prix at home!
The HIGHLIGHT is probably the built-in "ELECTRONIC STABILITY PROGRAM" (ESP) which keeps the rear-driven vehicle always well on track even on smooth surfaces such as laminate or tiled floors. Thanks to a built-in "gyro" as you also know from drones, the vehicle detect unnatural movements of the rear and steers automatically against it to prevent a breakaway (to a certain extent). However, if you still want to make wild drifts, you simply have to push the technology to its limits with your own driving skills, which is a lot of fun! On Top of that we add a set of drift wheels for carpet.
The removable 3.7V 300mAh LiPo battery is charged by a USB charger. The charging time is about 30-40 minutes and the driving time is about 20 minutes. Additional batteries are available for even more driving fun.
FEATURES:
- 2WD rear wheel drive
- 2.4GHz remote control
- Fully proportional control
- Maximum speed can be limited on the remote control
- Removable battery
SPECIFICATION:
- Servo: 3.7g Servo
- Motor: 8520 Coreless Motor
- Battery: 3.7V 300mAh LiPo Battery
- Speed throttleable: Yes
- ESP built in: Yes
- Charging time: approx. 30-40 minutes
- Driving time: approx. 20 minutes
- Dimensions (L/W/H): 185x85x70 mm
- Weight: 110 g
INCLUDED:
- 1:24 X-Racer Touring Car RTR
- 2.4GHz Remote Control
- 300mAh LiPo Battery
- USB Charger
- 1 Set Drift Wheels
- Manual
REQUIRED ACCESSORIES:
- 2* AA Batteries for Remote Control
ABSIMA BOOSTER ADB 1.4 DESERT BUGGY
€ 324,95
- 4WD all-wheel drive
- 2.4GHz remote control
- Extremely durable composite plastic parts
- Fully adjustable suspension
- Ball bearing drive
- Adjustable 16mm aluminum big bore shocks
- Steel differential outputs
- Aluminum chassis plate
- Adjustable upper suspension arms
- 5mm aluminum motor mount
- 5mm aluminum shock towers
- Aluminum driveshaft
- 2 CNC cone differentials (front/rear)
- LED light bar front and rear
- Extremely detailed body with add-on parts
- Vehicle should be powered by 2-cell (2S) LiPo battery pack
- Scale: 1:10
- Dimensions (L/W/H): 515x320x170 mm
- Weight: 2550g
- Wheelbase: 290mm
- Ground clearance: approx. 50mm
- Track width: 245mm front / 240mm rear
- Wheels front/rear Ø: 128mm / Width: 55mm
- Damper oil: 400CPS
- Damper installation length: 80mm
- Motor ratio brushless version: Pinion: 21T / Main gear: 77T (48dp)
- Dessert Buggy "ADB1.4" Brushless Version
- 2.4GHz Remote Control CR2SV2
- Mini tool kit
- Instruction manual
ABSIMA CRAWLER CR2.4 RTR 1:10 EP
€ 239,95
€ 199,95
Technische specificaties:
- LONTEN "CR-2.4 RTR".
- 40A geborstelde waterdichte cruise control met rupsmodus
- 4-link ophangsysteem met geanodiseerde aluminium ophangingsschakels voor soepel kruipen
- UJ telescopisch aandrijfsysteem voor maximale duurzaamheid
- Op het chassis gemonteerde digitale stuurservo
- Waterdichte cruise control 40A
- Massieve kogellagers
- Centrale versnellingsbak met 3 versnellingen in het midden
- Lage zwaartepunt motor mount
Bijzonderheden:
- Geschikte NiMH (7.2V) & LiPo (7.4V/2S) cruise control / Ampère: 40A / BEC 5V/2A / Aandrijffunctie: voor/achter (motorrem) / Aansluitsysteem: Tamiya
- Digitale servo 3kg stuurkracht / 25T overdrive
- Motor 22T maat 390
- 2-kanaals radio / 3-kanaals ontvanger / omgekeerd / dubbele frequentie
- Wielbasis: 280 mm
- Chassisspeling: Chassis 79 mm / As 38 mm
- Bandenbreedte: 40 mm voor/achter
- Ø banden ± 118 mm
- Demperveersterkte: zacht / Lengte: 78mm d/r
- Demperolie: 100 p/r
- Motor transmissie - 22T rondsel / 60T versnelling
- Tandwielmodule: 48dp
- Afmetingen (L/B/h): 500x225x240 mm
- Gewicht: 1560g
Elementen in de benzinerupsbox:
- Crawler "CR2.4" RTR
- Extra carrosserie van de JEEP
- 2,4 GHz radiosysteem
- Gebruikershandleiding
Vereiste elementen voor de CR2.4 Crawler:
- NiMH of LiPo batterij
- Compatibele oplader
Specificaties
| Elektrisch | |
| 1/10 | |
| 4 WD | |
| Gemonteerd | |
| Ja | |
| 2,4 GHz | |
| Borstelloze | |
| Motor 22T maat 390 | |
| NiMH (7,2 V) & LiPo (7,4 V/2 BS) | |
| Tamiya | |
| 500 (mm) | |
| 225 (mm) | |
| 240 (mm) | |
| 280 (mm) | |
| 1560 (g) |
ABSIMA Scale 1:16 4WD High Speed Sand Buggy 2,4GHz Black/Red - 16005
€ 89,95
Discover the RC model sport with the "First Step Performance" from Absima. More than 35 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC model technique. A safe 2.4 GHz remote control system supports the 40A electronic speed controller to release the power at your command. Small, fine, and mean! Take the first step into the world of RC model sport with this ready-to-run set.
Enjoying real RC racing with the 1/16 4WD RC car, you can get started quickly and handle it like a master. Competing with other advanced RC car lovers and enjoying the exciting racing on the street, in your backyard or in the woods!.
HIGHLIGHTS:
- Water-resistant Electronic
- Incl. Car Battery and USB Charging Cable
- Incl. LED Headlights
GENERAL CHASSIS FEATURES:
- 1/16th Scale
- 4WD
- Complete Ball Bearing
- 1.8kg Steering Servo
- Front & Rear Differentials
- Differential gears and motor pinion made from metal
- Shocks with Aluminum Caps
- High Performance Motor and Speed Controller
- CVD Drive Shafts
- Range aprox. 60m
- Drive Time: aprox. 12 Minutes
- Aluminum Cardan Shafts
- Adjustable Speed on the Radio
- Overheat Protection
- Incl. LED Headlights
- Incl. 2.4 GHz Radio System
- Full printed Body
- Overcharge & Over-discharge Protection
- 500mAh Li-Ion Car Battery
TECHNICAL SPECIFICATION:
- Measure: (L/W/H): 270 x 235 x 130 mm
- Weight : 730g
- Wheelbase: 175 mm
- Chassis Clearance: 45 mm
- Track Width: 190 mm front/rear
- Wheel Design: Monster Rubber / 5 Double Spoke Rims
- Tire Width: 45 mm
- Reifen Ø: ± 80 mm
- Shock Oil Viscosity : n.a.
- Shock Spring Force: Medium
- Shock Instalation Length: 65 mm front/rear
SCOPE OF DELIVERY:
- 1/16th RC Car
- 2.4 GHz Radio System
- Car Battery
- USB Charging Cable
- LED Headligths
- Manual
- 3 AA Cells for Radio
TAMIYA Aqroshot DT-03T
€ 134,95
1/10 RC Aqroshot (DT-03T)
Specificaties van het product:
- Type: Detail
- Schaal: 1/10
- Doos: kit
- Terrein gebruik: On-Road
- Aandrijving: 2WD
- Type aandrijving: Versnellingsbak/tandwielen
- Aandrijflijn: dogbone/assen
- Differentieel: Tandwielen
- Ophanging: Volledig onafhankelijke dubbele draagarmen
- Stuurmechanisme: Servo direct
- Schokdemper: Oliegevulde demper
- Schokdempermateriaal: Kunststof
- Bandentype: Rubber
- Loopvlak: Radial
- Bodymateriaal: Polycarbonaat/lexaan
- Chassis: Kunststof
- Electronic Speed Control (ESC) Inbegrepen
- ESC model: TBLE-02S
- LED Light kasten: Geen
- LED-verlichting: Geen
- Motor: 540-brushed
- Lagers: Plastic bus
- Camber: Vast
- Verstelbare spoor: alleen voorzijde
- Verstelbare bodemvrijheid: Ja
- Verstelbare overbrengingsverhouding: Ja
- Instelbare wielbasis: Vast
- Instelbare spoorbreedte: Vast
- Instelbare demperhoek: Vast
- Bijzonderheid 1: De DT-03T is gebaseerd op de DT-03, en erft haar probleemloze montage, duurzaamheid en moeiteloos rijden.
- Bijzonderheid 2: maakt gebruik van een in lengterichting geplaatste achter geplaatste motor en achterwielaandrijving configuratie.
- Bijzonderheid 3: Voorzien van een lange wielbasis voor meer stabiele prestaties.
- Bijzonderheid 4: Inclusief een Torque Tuned motor.
- Bijzonderheid 5: Stadium truck-stijl wielen zijn uitgerust met een breed loopvlak (radiaalbanden).
- Bijzonderheid 6: Inclusief Tamiya TBLE-02S ESC (kann zowel brushed als brushless motoren aan)
- Bijzonderheid 7: Meer dan 10 Hop-Up-opties zijn beschikbaar!
Niet in de kit en nog nodig:
- 7.2 Accu en lader
- 2-kanaals bestuuring
- Polycarbonaat verf voor de kap
TAMIYA 46702-S 1/10 RC X-SA Racing Fighter RTR (DT-03) RC ingebouwd
€ 199,95
Tamiya 46702-S 1/10 RTR Racing Fighter (DT-03)
De TAMIYA X-SA modellen zijn kant en klare auto´s van TAMIYA. Het model werd in de fabriek geassembleerd, inclusief de afgewerkte carrosserie. Het model is uitgerust met de elektronische snelheidsregelaar TEU-105BK en een elektromotor.
Wij bieden de Fighter RTR aan met een Carson X-1 zender. Het model is al volledig ingesteld, zodat u direct met het model kunt rijden.
Over het model:
- Dit is een afgewerkt R/C model in schaal 1/10 Lengte: 400mm, Breedte: 244mm, Hoogte: 134mm.
- Polycarbonaat body en vleugels zijn gespoten en bestickert
- Geribde voorbanden en banden met vierkante spikes achter zorgen voor betrouwbare off-roadprestaties.
- De DT-03 maakt gebruik van een robuust monocoque frame. De lange wielbasis (287 mm) en het grote loopvlak (voor: 221 mm, achter: 208 mm) zorgen voor geweldige prestaties op en naast de weg!
- De voorste draagarmen hebben een sliphoek van 25 graden voor een geweldige terreinvaardigheid.
- Voorzien van een afgedichte achterste versnellingsbak met intern differentieel en stofbestendig.
- ESC: TEU-105BK
- Motor: Type 540
- Afstandsbediening Carson X-1
- Servo C5
Benodigde accessoires: 7,2V NiMH-accu, lader voor rijaccu
Leveromvang:
- Volledig gemonteerd, klaar om te rijden Racing Fighter met een Carson X-1 zender.
TAMIYA 57879 1/10 RC XB Lowride Pumkin M-06 Incl. Zender Carson X1
€ 199,99
57879 1/10 RC XB Lowride Pumkin M-06 Incl. Zender Carson X1
Tamiya 57879 RC RTR LOWRIDE PUMPKIN M06Artikelnummer: 57879
EAN: 4950344578795
The Lowride Pumpkin M06 produced by Tamiya in 1/10 scale XB series RWD drivetrain RTR (Ready-to-Run), is classified in R/C Models - On-Road - M-Chassis Cars
This is a fully factory assembled and ready-to-run R/C model of the Lowride Pumpkin. The painted and finished super detailed ABS molded body is mated to the easy to maintain rear wheel drive M-06 chassis platform.
The M06 chassis features a 2WD rear-drive drive-train with fully independent double wishbone suspension. The layout features a longitudinally-mounted battery with the R/C components positioned on either side. The 4-wheel double wishbone suspension is paired with rear 60D Super Grip radial tires for improved rear traction. The pre-installed 2-channel radio gear system operates on 2.4GHz technology which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby.
Specifications:
- Scale 1/10
- Construction type: RTR (Ready-to-Run)
- Terrain use: On-Road
- Drive-train: 2WD RWD
- Drive type: Gearbox
- Drive line: Dog bone
- Differential type: Gear
- Suspension: Fully independent double wishbone
- Steering mechanism: Bell-crank
- Shock damper Friction damper
- Shock damper material: Plastic
- Tire type: Rubber
- Tire tread: Radial
- Body material: ABS Plastic
- Chassis material: Plastic
- Electronic Speed Control (ESC): Included
- ESC model: TEU-105BK
- LED Light buckets: No
- LED lights: No
- Motor: 540-brushed type
- Bearings: Plastic bushing
- Adjustable camber: Fixed
- djustable toe angles: Front only
- Adjustable ground clearance: Yes
- Adjustable gear ratio: Yes
- Adjustable wheelbase: Yes
- Adjustable track width: Fixed
- Adjustable shock angle: Yes
- Special feature 1: Factory finished R/C model.
- Special feature 2: Body is pre-painted with markings already applied.
- Special feature 3: The M-06 chassis features a rear-motor, rear-wheel drive setup.
- Special feature 4: Metal-plated disc wheels.
- Special feature 5: Includes: Carson X1 2.4GHz R/C system pre-installed.
- Special feature 6: Includes: TEU-105BK ESC (equipped with BEC) pre-installed.
- Requires A: 7.2 battery & charger
- Requires B: AA batteries
TAMIYA 58717 1:10 RC TT-02BR Chassis Kit Buggy
€ 340,00
€ 324,95
Tamiya 58717 1:10 RC TT-02BR Chassis Kit Buggy
Artikelnummer: 58717
EAN: 4950344587179
The Tamiya TT-02 and later TT-02B variant (B-standing for buggy off-road kits) chassis are among the most beginner friendly R/C products in our line-up. The TT-02BR chassis is an upgraded version of the TT-02B chassis kit with a wealth of upgraded parts, plus new aluminum propeller joints and carbon fiber damper stays to ensure a wide range of setup adjustments.
Included Hop-up Option Parts:
- NEW-Aluminum propeller joints
- NEW-Carbon fiber damper stays
- Item 22049: XV-02/TT-02 Oil Gear Differential Unit
- Item 54501: TT-02 Aluminum Propeller Shaft
- Item 54768: 06 Module Hard Coated Aluminum Pinion Gear (17T)
- Item 54993: TT-02B/DF-03 Aluminum Damper Set
- Item 53793: DF-02 Two-Way Aluminum Rear Uprights
- Item 54539: TT-02B Full Turnbuckle Set
- Item 53791: DF-02 Assembly Universal Shaft
- Item 53880: Large Dish Wheels (4WD/Front, 62/25)
- Item 53881: Large Dish Wheels (Rear, 62/35)
- Item 54211: TRF201 Rear Wing Set
- Item 54815: TT-02B Reinforced Gear Covers & Lower Suspension Arms (2pcs.)
- Item 54926: TT-02 Lower Deck (Hard/Black)
- 1/10 scale R/C chassis assembly kit.
- Drivetrain uses Item 22049-oil filled gear to adjust the effectiveness of gear differential by using different oil viscosities.
- *Diff. joint cups designed for this chassis kit for improved durability.
- New front and rear damper stays give more set up options of oil dampers and upper arms.
- Using front and rear universal drive shafts ensures stable drivetrain regardless of suspension stroke.
- Propeller shafts have plastic parts at joint sections of aluminum joint cups and shafts to limit wear of joint cups.
- Includes two rear wings - Neo Scorcher kit-standard one (transparent) and Item 54211 (TRF201 Rear Wing Set). Change wing stay when using Item 54211 TRF201 Rear Wing Set.
- Item 54211 includes two wide design wings to adjust downforce depending on running surface condition, and wing stay spacers also included to adjust rear wing angle.
- 4~6mm longer turnbuckle shafts help prevent plastic adjuster sections from deforming to ensure improved suspension movement.
- Steering linkage with flange pipes features improved durability by attachment using hex head screws and lock nuts compared to attachment using 3x18 step screws.
- Features full ball bearings.
- Comes with a carrying case dedicated for the TT-02BR chassis.
- Required to complete: 2-channel radio, steering servo, ESC, 540 motor, off-road tires, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint.
- Includes Neo Scorcher body (transparent). Original Neo Scorcher body stickers not included.
