MJX Hyper GO 10306 Ford Shelby GT500.

Officially licensed, brutally fast, and absolutely stunning. The MJX Hyper GO 10306 brings the legend of the Ford Mustang Shelby GT500 to the street in 1:10 scale. With its detailed design and striking blue finish, this RC car is a true collector's piece – but one that definitely shouldn't gather dust on a shelf. Because under the iconic hood lies uncompromising brushless power.

Powered by a high-performance 3652 3200KV Sensored Brushless Motor combined with an 80A ESC, the Hyper GO 10306 Ford Mustang delivers explosive acceleration and smooth throttle response. With a 2S LiPo, you'll already reach an impressive 47 km/h – for those who want it even wilder, switch to 3S and experience breathtaking 70 km/h top speed. The integrated Gyroscope (G3C) ensures stable tracking even at high speeds.

Technical Specifications

Package Contents

Pre-assembled MJX Hyper Go 10306 Ford Shelby GT500 (RTR), painted body, 2.4GHz transmitter, tool set (hex wrenches, screwdriver), 2x tire set, spare parts, manual.

The MJX Hyper GO 10303 Citroën C3 WRC is a powerful 1/10 rally/drift car with a licensed C3 WRC body, brushless power, and precise driving dynamics. A 7075 aluminum chassis, all-metal drivetrain, gyro stabilization (G3C), and a sensored 3652 motor deliver smooth acceleration, excellent tracking, and top speeds of up to approx. 70 km/h. Equipped with an integrated (wireless) LED lighting system and a magnetic quick-release body, the 10303 is extremely practical for everyday use and very user-friendly!

Features

• 1:10 4WD rally/drift car with officially licensed Citroën C3 WRC body
• G3C gyro for stable cornering lines and controlled drifts
• Brushless drive (sensored): 3652 motor (approx. 3200 KV) with 80A ESC
• Programming via Bluetooth app
• 7075 aluminum chassis, metal differentials & all-metal drivetrain
• Oil-filled shock absorbers for finely tuned handling
• Magnetic quick-release body & integrated light connectors
• Front/rear LED lighting system incl. brake/turn-signal function
• Fully proportional 2.4 GHz radio (R3B receiver)

Technical Specifications

Included

MJX Hyper GO 10303 Citroën C3 WRC (RTR, without battery!), 2.4 GHz transmitter, mounted wheels/tires (on-road), extra tire set, tools, spare parts pack & manual.

The MJX Hyper GO 14208 is a dynamic 1/14 off-road truck featuring a powerful brushless motor, robust suspension, and an eye-catching monster truck design. With its durable construction, high speed, and 4WD system, it delivers exciting performance both on-road and off-road.

Features

• 1:14 scale off-road monster truck
• Brushless system for strong acceleration and consistent performance
• 4WD (all-wheel drive) for excellent traction even on loose terrain
• Durable chassis and reinforced suspension components
• Oil-filled metal shock absorbers for smooth damping even on rough surfaces
• 2.4 GHz radio system for precise control and reliable range
• High top speed of approx. 45 km/h (depending on terrain)

Technical Specifications

Included in the Box

MJX Hyper GO 14208 (RTR, with battery & charger), 2.4 GHz transmitter, tools, user manual.

The MJX HYPER GO 14304 Volkswagen Polo R WRC is an agile 1/14 rally/drift car equipped with modern electronics and brushless power. Its durable chassis, full-metal drivetrain components, and oil-filled aluminum shocks ensure precise handling – whether on smooth asphalt or grippy rally tracks. With a 45A brushless ESC, built-in gyro, 2845 motor, and fully proportional 2.4GHz radio system, the 14304 delivers strong acceleration, precise steering, and speeds of up to 43 km/h.

Features

• 1:14 4WD rally/drift car with smooth drift and rubber tires
• Pre-installed gyro
• Brushless power system: 2845 motor (~3700KV) with 45A ESC
• Metal differentials & full ball bearings for extra durability
• Oil-filled metal shocks for stable and controlled handling
• Protective dust cover over the electronics
• Front & rear LED light system
• Fully proportional 2.4GHz remote control

Technical Specifications

Included in the Box

MJX Hyper GO 14304 (RTR), 2.4GHz transmitter, three different tire sets, 7.4V 2000mAh battery, USB charging cable, tools, and user manual.

• Preheating of cold accumulators increases performance and service life
• Storage temperature at room temperature of 20-25°
• Always store in a partially charged state at approx. 60%
• Protect from short circuit, damage, overheating, deep discharge and overcharging
• Only charge with a charger suitable for lithium batteries with the correct charging program outside the model and on a fireproof surface
• Do not use or charge batteries with cell damage or in a swollen state, but dispose of them properly
• Never charge or discharge unattended!

• Preheating of cold accumulators increases performance and service life
• Storage temperature at room temperature of 20-25°
• Always store in a partially charged state at approx. 60%
• Protect from short circuit, damage, overheating, deep discharge and overcharging
• Only charge with a charger suitable for lithium batteries with the correct charging program outside the model and on a fireproof surface
• Do not use or charge batteries with cell damage or in a swollen state, but dispose of them properly
• Never charge or discharge unattended!

The SkyRC S65neo is an AC charger and discharger that fits in one hand at 84 x 84 x 45.3 mm and 200 g, yet delivers 65 W of charging power at up to 10 A charge current. It runs straight from the mains at 100 to 240 V, so no separate power supply is required.

It charges LiPo, LiHV, Li-ion and LiFe with 2 to 4 cells, NiMH and NiCd with 6 to 8 cells and Pb batteries with 3 or 6 cells (6 or 12 V). The pack connects to the XT60 main port, the balance lead to the balance port next to it, and a dedicated socket for the temperature sensor sits on the same side.

Ten amps from a housing this size

At up to 10 A of charge current a pack is ready again considerably sooner than on a 6 A charger. This is made possible by a synchronous rectification circuit that raises efficiency and reduces waste heat. Main output and balance port monitor every single cell while charging; balance current is 500 mA maximum.

Charge, discharge, cycle, store

Lithium packs can be run in Balance Charge, Charge, Storage and Discharge, NiMH and NiCd additionally in Re-Peak and the cycle programs Cycle_C_D and Cycle_D_C, which run one to three charge/discharge passes to refresh a pack. Pb batteries are charged normally, as AGM or in cold charge mode. Discharging runs at 0.1 to 2 A; because the balance port works alongside the main output, the charger reaches up to 10 W of discharge power.

Internal resistance and Battery Meter

The Battery Meter shows total pack voltage, individual cell voltages and internal resistance – useful for spotting a fading pack before it shows up in a race.

ColorX interface, six menu languages

The ColorX interface with its light cyan and green colour scheme and responsive Web2.0 menu is operated with three buttons. Menu languages are English, German, French, Spanish, Chinese and Japanese, with English as the factory setting. A temperature sensor adjusts fan speed to load and temperature, and firmware updates run over the Type-C port using the SkyRC Charger Master PC software.

Power supply mode for RC accessories

The S65neo can output an adjustable DC voltage of 6 to 17 V at 0.5 to 9 A. SkyRC explicitly intends this as a supplementary output for RC accessories such as a pit light, tyre warmer or tyre sander: capacitive loads such as chargers or power supplies must not be connected, and batteries are not to be charged in DC mode.

Features

• 65 W charging power, charge current up to 10 A
• Discharging at 0.1 to 2 A, up to 10 W via main output and balance port
• XT60 main port, balance port and temperature sensor socket
• Working modes: Balance Charge, Charge, Storage and Discharge (lithium), Charge, Re-Peak, Cycle_C_D, Cycle_D_C and Discharge (NiMH/NiCd), Normal, AGM Charge, Cold Charge and Discharge (Pb)
• Battery Meter for total voltage, individual cells and internal resistance
• Adjustable DC power supply, 6 to 17 V at 0.5 to 9 A
• Synchronous rectification for high efficiency and low heat generation
• ColorX colour interface with selectable menu language
• Temperature-controlled fan
• Protections: automatic charge current limit, capacity and time limit, over-temperature, over-current, short circuit, reverse polarity, flame-retardant chassis
• Firmware updates over Type-C with SkyRC Charger Master

Technical Data

Scope of Delivery

• 1x SkyRC S65neo charger
• 1x AC power cord
• 1x instruction manual

The SkyRC T120 Pico is an AC charger with two fully independent charging circuits: two batteries of different chemistries can be charged at the same time, each with its own settings. Measuring 90 x 70 x 106 mm and weighing 355 g, it delivers 60 W per channel – 120 W of charging power in total – at up to 6 A charge current.

Both channels carry their XT60 output and balance socket on the front panel, so batteries are plugged in from the front. The charger handles LiPo, LiHV, Li-ion and LiFe with 2 to 4 cells, NiMH and NiCd with 6 to 8 cells and Pb batteries with 3 or 6 cells – the latter with an AGM mode and a cold charge mode for low temperatures alongside normal charging.

Precise control, down to every cell

Charging is governed by an Arm Cortex-M3 processor that keeps the selected values stable even under full load. Main output and balance port work together and monitor the voltage of every single cell throughout the charging process; balance current is 500 mA maximum.

Measure internal resistance on the charger

The Battery Meter function measures total pack voltage, individual cell voltages and internal resistance. During charging a press of the plus button is enough to scroll through the internal resistance of each cell – a quick way to judge the condition of a pack.

ColorX interface, six menu languages

The T120 Pico is operated through the ColorX interface with its light cyan and green colour scheme and responsive Web2.0 menu: plus, enter and minus buttons plus a dedicated channel button to switch between A and B. The menu language can be set to English, German, French, Spanish, Chinese or Japanese, with English as the factory setting. A temperature sensor adjusts fan speed to load and temperature, keeping the charger quiet at low currents. Firmware updates run over the USB-C port using the SkyRC Charger Master PC software.

Power supply mode for RC accessories

Each port can output an adjustable DC voltage of 6 to 17 V at 0.5 to 6 A. SkyRC explicitly intends this as a supplementary output for RC accessories such as a pit light, tyre warmer or tyre sander: capacitive loads such as chargers or power supplies must not be connected, and batteries are not to be charged in DC mode.

Features

• Two independent charging circuits at 60 W each, 120 W in total
• Charge current up to 6 A, balance current up to 500 mA
• XT60 output and balance socket per channel, accessible from the front
• Working modes: Balance Charge, Charge and Storage (lithium), Charge and Re-Peak (NiMH/NiCd), Normal, AGM Charge and Cold Charge (Pb)
• Battery Meter for total voltage, individual cells and internal resistance
• Adjustable DC power supply, 6 to 17 V and 0.5 to 6 A per port
• ColorX colour interface with selectable menu language
• Temperature-controlled fan
• Adjustable safety cut-off by time and capacity, switchable trickle charge, float mode for Pb batteries
• Protections: short circuit, reverse polarity, over-voltage, overload, over-temperature, capacity and time limit, flame-retardant chassis
• Firmware updates over USB-C with SkyRC Charger Master

Technical Data

Scope of Delivery

• 1x SkyRC T120 Pico charger
• 1x power cord
• 1x instruction manual

YR exquisitely designed the SPEC D series which consists of both Wheels and Tires for 1/10 Drift cars. The Spec D Tires are made of premium material which enhance drifting performance on great variety of surfaces; while the Wheels are precisely crafted to give an authentic appearance without any trade off on durability. Spec D Series of Wheels and Tires is a must-have for drifters that care their drift machine's performance as much as the looks.

Features:

• For: 1/10 Drift Car
• Material: Premium Material
• Color: White & Gold
• Exquisite Design

Includes:

• Drift Wheels and Tires Set (4 sets)
• Tire Insets (4 pcs)